Daily Papers

Large language models (LLMs) have demonstrated remarkable capabilities in natural language understanding and task generalization. However, their application to structured data analysis remains fragile due to inconsistencies in schema interpretation, misalignment between user intent and model output, and limited mechanisms for self-correction when failures occur. This paper introduces the STROT Framework (Structured Task Reasoning and Output Transformation), a method for structured prompting and feedback-driven transformation logic generation aimed at improving the reliability and semantic alignment of LLM-based analytical workflows. STROT begins with lightweight schema introspection and sample-based field classification, enabling dynamic context construction that captures both the structure and statistical profile of the input data. This contextual information is embedded in structured prompts that guide the model toward generating task-specific, interpretable outputs. To address common failure modes in complex queries, STROT incorporates a refinement mechanism in which the model iteratively revises its outputs based on execution feedback and validation signals. Unlike conventional approaches that rely on static prompts or single-shot inference, STROT treats the LLM as a reasoning agent embedded within a controlled analysis loop -- capable of adjusting its output trajectory through planning and correction. The result is a robust and reproducible framework for reasoning over structured data with LLMs, applicable to diverse data exploration and analysis tasks where interpretability, stability, and correctness are essential.

Autonomous systems, such as self-driving cars and drones, have made significant strides in recent years by leveraging visual inputs and machine learning for decision-making and control. Despite their impressive performance, these vision-based controllers can make erroneous predictions when faced with novel or out-of-distribution inputs. Such errors can cascade into catastrophic system failures and compromise system safety. In this work, we compute Neural Reachable Tubes, which act as parameterized approximations of Backward Reachable Tubes to stress-test the vision-based controllers and mine their failure modes. The identified failures are then used to enhance the system safety through both offline and online methods. The online approach involves training a classifier as a run-time failure monitor to detect closed-loop, system-level failures, subsequently triggering a fallback controller that robustly handles these detected failures to preserve system safety. For the offline approach, we improve the original controller via incremental training using a carefully augmented failure dataset, resulting in a more robust controller that is resistant to the known failure modes. In either approach, the system is safeguarded against shortcomings that transcend the vision-based controller and pertain to the closed-loop safety of the overall system. We validate the proposed approaches on an autonomous aircraft taxiing task that involves using a vision-based controller to guide the aircraft towards the centerline of the runway. Our results show the efficacy of the proposed algorithms in identifying and handling system-level failures, outperforming methods that rely on controller prediction error or uncertainty quantification for identifying system failures.

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

In this paper, a novel machine learning derived control performance assessment (CPA) classification system is proposed. It is dedicated for a wide class of PID-based control industrial loops with processes exhibiting dynamical properties close to second order plus delay time (SOPDT). The proposed concept is very general and easy to configure to distinguish between acceptable and poor closed loop performance. This approach allows for determining the best (but also robust and practically achievable) closed loop performance based on very popular and intuitive closed loop quality factors. Training set can be automatically derived off-line using a number of different, diverse control performance indices (CPIs) used as discriminative features of the assessed control system. The proposed extended set of CPIs is discussed with comprehensive performance assessment of different machine learning based classification methods and practical application of the suggested solution. As a result, a general-purpose CPA system is derived that can be immediately applied in practice without any preliminary or additional learning stage during normal closed loop operation. It is verified by practical application to assess the control system for a laboratory heat exchange and distribution setup.

Augmenting Large Language Models (LLMs) with external tools enables them to execute complex, multi-step tasks. However, tool learning is hampered by the static synthetic data pipelines where data generation and model training are executed as two separate, non-interactive processes. This approach fails to adaptively focus on a model's specific weaknesses and allows noisy labels to persist, degrading training efficiency. We introduce LoopTool, a fully automated, model-aware data evolution framework that closes this loop by tightly integrating data synthesis and model training. LoopTool iteratively refines both the data and the model through three synergistic modules: (1) Greedy Capability Probing (GCP) diagnoses the model's mastered and failed capabilities; (2) Judgement-Guided Label Verification (JGLV) uses an open-source judge model to find and correct annotation errors, progressively purifying the dataset; and (3) Error-Driven Data Expansion (EDDE) generates new, challenging samples based on identified failures. This closed-loop process operates within a cost-effective, open-source ecosystem, eliminating dependence on expensive closed-source APIs. Experiments show that our 8B model trained with LoopTool significantly surpasses its 32B data generator and achieves new state-of-the-art results on the BFCL-v3 and ACEBench benchmarks for its scale. Our work demonstrates that closed-loop, self-refining data pipelines can dramatically enhance the tool-use capabilities of LLMs.

To stabilize the periodic operation of a chemical reactor the oscillation period should be determined precisely in real time. The method discussed in the paper is based on adaptive sampling of the state variable with the use of chaotic mapping to itself. It enables precise determination of the oscillation period in real time and could be used for a proper control system, that can successfully control the process and maintain the oscillation period at a set level. The method was applied to a tank reactor and tubular reactor with recycle.

Large language models are being widely used across industries to generate content that contributes directly to key performance metrics, such as conversion rates. Pretrained models, however, often fall short when it comes to aligning with human preferences or optimizing for business objectives. As a result, fine-tuning with good-quality labeled data is essential to guide models to generate content that achieves better results. Controlled experiments, like A/B tests, can provide such data, but they are often expensive and come with significant engineering and logistical challenges. Meanwhile, companies have access to a vast amount of historical (observational) data that remains underutilized. In this work, we study the challenges and opportunities of fine-tuning LLMs using observational data. We show that while observational outcomes can provide valuable supervision, directly fine-tuning models on such data can lead them to learn spurious correlations. We present empirical evidence of this issue using various real-world datasets and propose DeconfoundLM, a method that explicitly removes the effect of known confounders from reward signals. Using simulation experiments, we demonstrate that DeconfoundLM improves the recovery of causal relationships and mitigates failure modes found in fine-tuning methods that ignore or naively incorporate confounding variables. Our findings highlight that while observational data presents risks, with the right causal corrections, it can be a powerful source of signal for LLM alignment. Please refer to the project page for code and related resources.

In modern recommendation systems, the standard pipeline involves training machine learning models on historical data to predict user behaviors and improve recommendations continuously. However, these data training loops can introduce interference in A/B tests, where data generated by control and treatment algorithms, potentially with different distributions, are combined. To address these challenges, we introduce a novel approach called weighted training. This approach entails training a model to predict the probability of each data point appearing in either the treatment or control data and subsequently applying weighted losses during model training. We demonstrate that this approach achieves the least variance among all estimators that do not cause shifts in the training distributions. Through simulation studies, we demonstrate the lower bias and variance of our approach compared to other methods.

Retrieval-augmented QA pipelines often route retrieved passages through an LLM rewriter before a smaller reader, lifting F1 by tens of points on multi-hop benchmarks; this gain is typically credited to improved evidence quality. We ask whether that lift is causally driven by the gold answer string appearing in the rewritten context rather than by curation per se, using a controlled intervention audit. For each rewritten context we re-run the reader after one of four controlled edits to the compile output: removing the gold answer span, replacing a length-matched random non-answer span (placebo), or injecting the gold into rewrites where it was absent (at the prefix or at a midpoint sentence boundary). Across twelve completed (cell, baseline) intervention runs spanning three reader families (Qwen2.5-7B, Qwen3.5-35B, GLM-4.7), two datasets (HotpotQA, 2WikiMultihopQA), and three compiler arrangements (MA-only, MB-only, MA+verify), removing the gold answer drops reader F1 by 28 to 64 points beyond the length-matched placebo on paired answer-in-compile strata, and prepending the gold into rewrites that lacked it raises F1 by +0.7 to +9.7 points in 10 of 12 (cell, baseline) combinations. A companion five-sentinel audit shows the conventional single-[MASK] probe is itself sentinel-fragile: on 2Wiki it reports a +4.12~F1 ``non-leakage residual'' that flips to -3.33 to -7.81~F1 under four alternative sentinels and fails an equivalence test for three of those four (1/4~pass). We do not propose a new rewriter or mitigation; we release the intervention runner and the sentinel panel so that other rewriter-gain claims can be tested against the same standard.

Randomized controlled trials (RCTs) are the benchmark for causal inference, yet field implementation can deviate. We here present a remote audit - a design-based, preregistrable diagnostic that uses only pre-treatment satellite imagery to test whether assignment is independent of local conditions. The conditional randomization test of the remote audit evaluates whether treatment assignment is more predictable from pre-treatment satellite features than expected under the experiment's registered mechanism, providing a finite-sample valid, design-based diagnostic that requires no parametric assumptions. The procedure is finite-sample valid, honors blocks and clusters, and controls multiplicity across image models and resolutions via a max-statistic. We illustrate with two RCTs: Uganda's Youth Opportunities Program, where the audit corroborates randomization and flags selection and missing-data risks; and a school-based trial in Bangladesh, where assignment is highly predictable from pre-treatment features relative to the stated design, consistent with independent concerns about irregularities. Remote audits complement balance tests, lower early-stage costs, and enable rapid design checks when baseline surveys are expensive or infeasible.

Automating scientific discovery requires more than generating papers from ideas. Real research is iterative: hypotheses are challenged from multiple perspectives, experiments fail and inform the next attempt, and lessons accumulate across cycles. Existing autonomous research systems often model this process as a linear pipeline: they rely on single-agent reasoning, stop when execution fails, and do not carry experience across runs. We present AutoResearchClaw, a multi-agent autonomous research pipeline built on five mechanisms: structured multi-agent debate for hypothesis generation and result analysis, a self-healing executor with a Pivot/Refine decision loop that transforms failures into information, verifiable result reporting that prevents fabricated numbers and hallucinated citations, human-in-the-loop collaboration with seven intervention modes spanning full autonomy to step-by-step oversight, and cross-run evolution that converts past mistakes into future safeguards. On ARC-Bench, a 25-topic experiment-stage benchmark, AutoResearchClaw outperforms AI Scientist v2 by 54.7%. A human-in-the-loop ablation across seven intervention modes reveals that precise, targeted collaboration at high-leverage decision points consistently outperforms both full autonomy and exhaustive step-by-step oversight. We position AutoResearchClaw as a research amplifier that augments rather than replaces human scientific judgment. Code is available at https://github.com/aiming-lab/AutoResearchClaw.

Agent benchmarks score submissions with outcome verifiers that are typically hand-written and brittle, leaving them open to reward hacking. We audit 1,968 tasks across five terminal-agent benchmarks and find 323 (16%) hackable by frontier models given only the task description. This corrupts both leaderboard rankings and RL training signal, yet the standard response is manual and reactive. We introduce the hacker-fixer loop, a method for building exploit-resistant verifiers without per-task manual patching. The loop alternates three LLM agents: a hacker tries to pass the verifier without solving the task, a fixer patches the verifier to reject each discovered exploit, and a solver confirms the patched verifier still admits legitimate solutions. The loop iterates: each patch reshapes what the verifier rewards, surfacing the next exploit. We further add verifier access, and let patches transfer across tasks, to broaden the exploits the loop discovers. On KernelBench, the loop drives the attack success rate from 62% to 0% on a held-out corpus of publicly reported exploits. We also find that weaker agents in the loop can defend against much stronger hackers: Gemini 3 Flash's loop drives the stronger Gemini 3.1 Pro and Claude Opus 4.7's attack success rate from 76% and 61% to 0% on KernelBench, and Gemini 3.1 Pro's from 39% to 17% on Terminal Bench across 77 tasks. We release Terminal Wrench (323 hackable environments, 3,632 hack trajectories) as a snapshot of the current attack surface, our patched verifiers, the exploits the loop discovered, and our implementation as a basis for future work.

Automated vulnerability reproduction from CVE descriptions requires generating executable Proof-of-Concept (PoC) exploits and validating them in target environments. This process is critical in software security research and practice, yet remains time-consuming and demands specialized expertise when performed manually. While LLM agents show promise for automating this task, existing approaches often conflate exploring attack directions with fixing implementation details, which leads to unproductive debugging loops when reproduction fails. To address this, we propose CVE2PoC, an LLM-based dual-loop agent framework following a plan-execute-evaluate paradigm. The Strategic Planner analyzes vulnerability semantics and target code to produce structured attack plans. The Tactical Executor generates PoC code and validates it through progressive verification. The Adaptive Refiner evaluates execution results and routes failures to different loops: the Tactical Loop for code-level refinement, while the Strategic Loop for attack strategy replanning. This dual-loop design enables the framework to escape ineffective debugging by matching remediation to failure type. Evaluation on two benchmarks covering 617 real-world vulnerabilities demonstrates that CVE2PoC achieves 82.9% and 54.3% reproduction success rates on SecBench.js and PatchEval, respectively, outperforming the best baseline by 11.3% and 20.4%. Human evaluation confirms that generated PoCs achieve comparable code quality to human-written exploits in readability and reusability.

Reproducibility is central to research credibility, yet large-scale reanalysis of empricial data remains costly because replication packages vary widely in structure, software environment, and documentation. We develop and evaluate an agentic AI workflow that addresses this execution bottleneck while preserving scientific rigor. The system separates scientific reasoning from computational execution: researchers design fixed diagnostic templates, and the workflow automates the acquisition, harmonization, and execution of replication materials using pre-specified, version-controlled code. A structured knowledge layer records resolved failure patterns, enabling adaptation across heterogeneous studies while keeping each pipeline version transparent and stable. We evaluate this workflow on 92 instrumental variable (IV) studies, including 67 with manually verified reproducible 2SLS estimates and 25 newly published IV studies under identical criteria. For each paper, we analyze up to three two-stage least squares (2SLS) specifications, totaling 215. Across the 92 papers, the system achieves 87% end-to-end success overall. Conditional on accessible data and code, reproducibility is 100% at both the paper and specification levels. The framework substantially lowers the cost of executing established empirical protocols and can be adapted in empirical settings where analytic templates and norms of transparency are well established.

Loop invariants are fundamental to reasoning about programs with loops. They establish properties about a given loop's behavior. When they additionally are inductive, they become useful for the task of formal verification that seeks to establish strong mathematical guarantees about program's runtime behavior. The inductiveness ensures that the invariants can be checked locally without consulting the entire program, thus are indispensable artifacts in a formal proof of correctness. Finding inductive loop invariants is an undecidable problem, and despite a long history of research towards practical solutions, it remains far from a solved problem. This paper investigates the capabilities of the Large Language Models (LLMs) in offering a new solution towards this old, yet important problem. To that end, we first curate a dataset of verification problems on programs with loops. Next, we design a prompt for exploiting LLMs, obtaining inductive loop invariants, that are checked for correctness using sound symbolic tools. Finally, we explore the effectiveness of using an efficient combination of a symbolic tool and an LLM on our dataset and compare it against a purely symbolic baseline. Our results demonstrate that LLMs can help improve the state-of-the-art in automated program verification.

This report describes ARIS (Auto-Research-in-sleep), an open-source research harness for autonomous research, including its architecture, assurance mechanisms, and early deployment experience. The performance of agent systems built on LLMs depends on both the model weights and the harness around them, which governs what information to store, retrieve, and present to the model. For long-horizon research workflows, the central failure mode is not a visible breakdown but a plausible unsupported success: a long-running agent can produce claims whose evidential support is incomplete, misreported, or silently inherited from the executor's framing. Therefore, we present ARIS as a research harness that coordinates machine-learning research workflows through cross-model adversarial collaboration as a default configuration: an executor model drives forward progress while a reviewer from a different model family is recommended to critique intermediate artifacts and request revisions. ARIS has three architectural layers. The execution layer provides more than 65 reusable Markdown-defined skills, model integrations via MCP, a persistent research wiki for iterative reuse of prior findings, and deterministic figure generation. The orchestration layer coordinates five end-to-end workflows with adjustable effort settings and configurable routing to reviewer models. The assurance layer includes a three-stage process for checking whether experimental claims are supported by evidence: integrity verification, result-to-claim mapping, and claim auditing that cross-checks manuscript statements against the claim ledger and raw evidence, as well as a five-pass scientific-editing pipeline, mathematical-proof checks, and visual inspection of the rendered PDF. A prototype self-improvement loop records research traces and proposes harness improvements that are adopted only after reviewer approval.

The objective is the design of a Cellular Automata rule that can form patterns with 'touching' loops. A loop is defined as a closed path of 1-cells in a 2D grid on a zero background and with a zero border. A path cell is connected with two of its adjacent neighbors. In touching loops a path cell is also allowed to touch another on a diagonal. A CA rule was designed that can evolve stable touching loop patterns. The rule tries to cover the 2D space by overlapping tiles. The rule uses so-called templates, 5 x 5 matching patterns which are systematically derived from the given set of 3 x 3 tiles. The rule checks the pattern being evolved against a list of templates. If the outer neighbors of a template match, then the cell's state is set to the template's center value. Noise is injected if there is no matching template, or the tiles are not properly assembled. Thereby the evolution is driven to the desired loop patterns.

Language models influence the external world: they query APIs that read and write to web pages, generate content that shapes human behavior, and run system commands as autonomous agents. These interactions form feedback loops: LLM outputs affect the world, which in turn affect subsequent LLM outputs. In this work, we show that feedback loops can cause in-context reward hacking (ICRH), where the LLM at test-time optimizes a (potentially implicit) objective but creates negative side effects in the process. For example, consider an LLM agent deployed to increase Twitter engagement; the LLM may retrieve its previous tweets into the context window and make them more controversial, increasing engagement but also toxicity. We identify and study two processes that lead to ICRH: output-refinement and policy-refinement. For these processes, evaluations on static datasets are insufficient -- they miss the feedback effects and thus cannot capture the most harmful behavior. In response, we provide three recommendations for evaluation to capture more instances of ICRH. As AI development accelerates, the effects of feedback loops will proliferate, increasing the need to understand their role in shaping LLM behavior.

A/B tests are typically analyzed via frequentist p-values and confidence intervals; but these inferences are wholly unreliable if users endogenously choose samples sizes by *continuously monitoring* their tests. We define *always valid* p-values and confidence intervals that let users try to take advantage of data as fast as it becomes available, providing valid statistical inference whenever they make their decision. Always valid inference can be interpreted as a natural interface for a sequential hypothesis test, which empowers users to implement a modified test tailored to them. In particular, we show in an appropriate sense that the measures we develop tradeoff sample size and power efficiently, despite a lack of prior knowledge of the user's relative preference between these two goals. We also use always valid p-values to obtain multiple hypothesis testing control in the sequential context. Our methodology has been implemented in a large scale commercial A/B testing platform to analyze hundreds of thousands of experiments to date.

Yes. Can it cure doom loops? Probably not. The Gemma 4 instruction-tuned models share a reproducible failure: on long factual enumeration prompts, such as listing every episode of a TV series, the 88 IAU constellations, or the 151 original Pokemon, they collapse into repetition, either a tight verbatim loop or a list whose entries decay onto a single answer. These loops occur at rates as high as 95% and survive prompt rewording, inference-engine changes, and most sampling adjustments. In this paper we explore whether this behavior is localized enough to remove by weight edits. To localize the cause, we use per-layer ablation and per-neuron attribution, then confirm the strongest candidates with full-generation sweeps. The loops trace to a small set of MLP neurons (or, in the 26B-A4B Mixture-of-Experts model, a few routed experts) which we suppress with static weight edits. These "surgeries" can be as small as a single sign-inverted neuron (in the E2B model). The size of the effective edits grows with model scale, but in all cases, the loop patterns can be addressed at normal generation budgets while preserving general-purpose benchmark scores. However, the edits do not solve everything: we also study longer thinking budgets, where the two larger models most visibly enter doom looping, i.e. a non-convergent regime in which the model self-corrects in circles over a fact it cannot recall, exhausting the budget without committing to a final answer. We show this residual failure is reduced but not eliminated by the same edits, and argue it is fundamentally a knowledge-precision problem rather than a removable circuit; weight surgery can delete a loop, but it cannot supply a missing fact. Our results are both a feasibility demonstration, that is, evidence that a concrete generation pathology can be localized to a few parameters and edited out, and a delineation of where that approach stops.

Existing evaluation paradigms for Autonomous Vehicles (AVs) face critical limitations. Real-world evaluation is often challenging due to safety concerns and a lack of reproducibility, whereas closed-loop simulation can face insufficient realism or high computational costs. Open-loop evaluation, while being efficient and data-driven, relies on metrics that generally overlook compounding errors. In this paper, we propose pseudo-simulation, a novel paradigm that addresses these limitations. Pseudo-simulation operates on real datasets, similar to open-loop evaluation, but augments them with synthetic observations generated prior to evaluation using 3D Gaussian Splatting. Our key idea is to approximate potential future states the AV might encounter by generating a diverse set of observations that vary in position, heading, and speed. Our method then assigns a higher importance to synthetic observations that best match the AV's likely behavior using a novel proximity-based weighting scheme. This enables evaluating error recovery and the mitigation of causal confusion, as in closed-loop benchmarks, without requiring sequential interactive simulation. We show that pseudo-simulation is better correlated with closed-loop simulations (R^2=0.8) than the best existing open-loop approach (R^2=0.7). We also establish a public leaderboard for the community to benchmark new methodologies with pseudo-simulation. Our code is available at https://github.com/autonomousvision/navsim.

We present a deployed system that automates end-to-end customer support workflows inside an enterprise Business Process Management (BPM) platform. The approach is scalable in production and reaches selective automation within two weeks for a new process, leveraging supervision already generated at scale: structured per-case UI interaction traces and low-overhead copilot feedback, where operators either accept a suggestion or provide a correction. A staged deployment pipeline trains a next UI action policy, learns a critic from copilot feedback to calibrate abstention, and executes only high-confidence steps in the background while deferring uncertain decisions to operators and resuming from the updated UI state. This setup lets one operator supervise multiple concurrent sessions and be interrupted only when the system is uncertain. The system operates on a schema-driven view of the BPM interface and includes monitoring and safe fallbacks for production. In production, it automated 45% of sessions and reduced average handling time by 39% without degrading support quality level.

In recent years, trace generation has emerged as a significant challenge within the Process Mining community. Deep Learning (DL) models have demonstrated accuracy in reproducing the features of the selected processes. However, current DL generative models are limited in their ability to adapt the learned distributions to generate data samples based on specific conditions or attributes. This limitation is particularly significant because the ability to control the type of generated data can be beneficial in various contexts, enabling a focus on specific behaviours, exploration of infrequent patterns, or simulation of alternative 'what-if' scenarios. In this work, we address this challenge by introducing a conditional model for process data generation based on a conditional variational autoencoder (CVAE). Conditional models offer control over the generation process by tuning input conditional variables, enabling more targeted and controlled data generation. Unlike other domains, CVAE for process mining faces specific challenges due to the multiperspective nature of the data and the need to adhere to control-flow rules while ensuring data variability. Specifically, we focus on generating process executions conditioned on control flow and temporal features of the trace, allowing us to produce traces for specific, identified sub-processes. The generated traces are then evaluated using common metrics for generative model assessment, along with additional metrics to evaluate the quality of the conditional generation

This study investigates GPT-4's assessment of its performance in healthcare applications. A simple prompting technique was used to prompt the LLM with questions taken from the United States Medical Licensing Examination (USMLE) questionnaire and it was tasked to evaluate its confidence score before posing the question and after asking the question. The questionnaire was categorized into two groups-questions with feedback (WF) and questions with no feedback(NF) post-question. The model was asked to provide absolute and relative confidence scores before and after each question. The experimental findings were analyzed using statistical tools to study the variability of confidence in WF and NF groups. Additionally, a sequential analysis was conducted to observe the performance variation for the WF and NF groups. Results indicate that feedback influences relative confidence but doesn't consistently increase or decrease it. Understanding the performance of LLM is paramount in exploring its utility in sensitive areas like healthcare. This study contributes to the ongoing discourse on the reliability of AI, particularly of LLMs like GPT-4, within healthcare, offering insights into how feedback mechanisms might be optimized to enhance AI-assisted medical education and decision support.

Language models are increasingly used in scientific discovery to generate hypotheses, propose candidate solutions, implement systems, and iteratively refine them. At the core of these trial-and-error loops lies evaluation: the process of obtaining feedback on candidate solutions via verifiers, simulators, or task-specific scoring functions. While prior work has highlighted the importance of evaluation, it has not explicitly formulated the problem of how evaluation-driven discovery loops can be scaled up in a principled and effective manner to push the boundaries of scientific discovery, a problem this paper seeks to address. We introduce Simple Test-time Evaluation-driven Scaling (SimpleTES), a general framework that strategically combines parallel exploration, feedback-driven refinement, and local selection, revealing substantial gains unlocked by scaling evaluation-driven discovery loops along the right dimensions. Across 21 scientific problems spanning six domains, SimpleTES discovers state-of-the-art solutions using gpt-oss models, consistently outperforming both frontier-model baselines and sophisticated optimization pipelines. Particularly, we sped up the widely used LASSO algorithm by over 2x, designed quantum circuit routing policies that reduce gate overhead by 24.5%, and discovered new Erdos minimum overlap constructions that surpass the best-known results. Beyond novel discoveries, SimpleTES produces trajectory-level histories that naturally supervise feedback-driven learning. When post-trained on successful trajectories, models not only improve efficiency on seen problems but also generalize to unseen problems, discovering solutions that base models fail to uncover. Together, our results establish effective evaluation-driven loop scaling as a central axis for advancing LLM-driven scientific discovery, and provide a simple yet practical framework for realizing these gains.

The dominant paradigm for building LLM based agents is the Agent Loop, an iterative cycle where a single language model decides what to do next by reading an ever growing context window. This paradigm has three structural weaknesses: implicit dependencies between steps, unbounded recovery loops, and mutable execution history that complicates debugging. We characterize the Agent Loop as a single ready unit scheduler: at any moment, at most one executable unit is active, and the choice of which unit to activate comes from opaque LLM inference rather than an inspectable policy. This perspective places Agent Loops and graph based execution engines on a single semantic continuum. We propose SGH, Structured Graph Harness, which lifts control flow from implicit context into an explicit static DAG. SGH makes three commitments: execution plans are immutable within a plan version, planning execution and recovery are separated into three layers, and recovery follows a strict escalation protocol. These choices trade some expressiveness for controllability, verifiability, and implementability. Our contributions are fourfold: a scheduler unified framework that applies classical scheduling theory to LLM agent execution and identifies challenges introduced by non deterministic LLM nodes; a trade off analysis of controllability, expressiveness, and implementability across 70 surveyed systems; a formal specification including a node state machine with termination and soundness guarantees; and an attributable experimental framework with a seven group design for future validation. This is a position paper and design proposal. We provide a theoretical framework, design analysis, and experimental protocol, not a production implementation or empirical results.

Agentic AI coding systems can inspect repositories, plan implementation steps, edit files, call tools, run tests, and submit pull requests. These capabilities make software and hardware development faster in some settings, but current evidence does not support the simple claim that autonomous code generation automatically improves engineering outcomes. Controlled studies report productivity gains in some enterprise tasks, slowdowns in mature open-source work, moderate but heterogeneous meta-analytic effects, and persistent failures in repository setup, dependency handling, permission gating, and hardware verification. This paper argues that the central problem is no longer prompt engineering; it is engineering process control. It synthesizes evidence from agentic software engineering, GitHub-scale adoption studies, repository-level agent configuration, productivity trials, issue-resolution benchmarks, and hardware/RTL verification research. It proposes Agentic Agile-V, a process framework that uses Agile-V as the lifecycle backbone and a task-level SCOPE-V loop - Specify, Constrain, Orchestrate, Prove, Evolve, and Verify - to convert conversational intent into structured engineering artifacts and acceptance evidence. The paper contributes: (i) a taxonomy of minimum input artifacts for agentic software, firmware, and hardware work; (ii) a conversation-to-contract gate that separates exploratory dialogue from implementation; (iii) risk-adaptive feature, bug-fix, testing, and hardware workflows; and (iv) an evidence-bundle acceptance model for agent-generated artifacts. The paper concludes that agentic AI does not eliminate engineering discipline; it increases the value of requirements, constraints, traceability, independent verification, and human approval.

Exploratory data analytics (EDA) is a sequential decision making process where analysts choose subsequent queries that might lead to some interesting insights based on the previous queries and corresponding results. Data processing systems often execute the queries on samples to produce results with low latency. Different downsampling strategy preserves different statistics of the data and have different magnitude of latency reductions. The optimum choice of sampling strategy often depends on the particular context of the analysis flow and the hidden intent of the analyst. In this paper, we are the first to consider the impact of sampling in interactive data exploration settings as they introduce approximation errors. We propose a Deep Reinforcement Learning (DRL) based framework which can optimize the sample selection in order to keep the analysis and insight generation flow intact. Evaluations with 3 real datasets show that our technique can preserve the original insight generation flow while improving the interaction latency, compared to baseline methods.

Scaling Transformer-based click-through rate (CTR) models by stacking more parameters brings growing computational and storage overhead, creating a widening gap between scaling ambitions and the stringent industrial deployment constraints. We propose LoopCTR, which introduces a loop scaling paradigm that increases training-time computation through recursive reuse of shared model layers, decoupling computation from parameter growth. LoopCTR adopts a sandwich architecture enhanced with Hyper-Connected Residuals and Mixture-of-Experts, and employs process supervision at every loop depth to encode multi-loop benefits into the shared parameters. This enables a train-multi-loop, infer-zero-loop strategy where a single forward pass without any loop already outperforms all baselines. Experiments on three public benchmarks and one industrial dataset demonstrate state-of-the-art performance. Oracle analysis further reveals 0.02--0.04 AUC of untapped headroom, with models trained with fewer loops exhibiting higher oracle ceilings, pointing to a promising frontier for adaptive inference.

Code production is now a commodity; the bottleneck is knowing what to build and proving it works. We present the Kitchen Loop, a framework for autonomous, self-evolving software built on a unified trust model: (1) a specification surface enumerating what the product claims to support; (2) 'As a User x 1000', where an LLM agent exercises that surface as a synthetic power user at 1,000x human cadence; (3) Unbeatable Tests, ground-truth verification the code author cannot fake; and (4) Drift Control, continuous quality measurement with automated pause gates. We validate across two production systems over 285+ iterations, producing 1,094+ merged pull requests with zero regressions detected by the regression oracle (methodology in Section 6.1). We observe emergent properties at scale: multi-iteration self-correction chains, autonomous infrastructure healing, and monotonically improving quality gates. The primitives are not new; our contribution is their composition into a production-tested system with the operational discipline that makes long-running autonomous evolution safe.

Large language models (LLMs) have enabled agent-based systems that aim to automate scientific research workflows. Most existing approaches focus on fully autonomous discovery, where AI systems generate research ideas, conduct analyses, and produce manuscripts with minimal human involvement. However, empirical research in economics and the social sciences poses additional constraints: research questions must be grounded in available datasets, identification strategies require careful design, and human judgment remains essential for evaluating economic significance. We introduce HLER (Human-in-the-Loop Economic Research), a multi-agent architecture that supports empirical research automation while preserving critical human oversight. The system orchestrates specialized agents for data auditing, data profiling, hypothesis generation, econometric analysis, manuscript drafting, and automated review. A key design principle is dataset-aware hypothesis generation, where candidate research questions are constrained by dataset structure, variable availability, and distributional diagnostics, reducing infeasible or hallucinated hypotheses. HLER further implements a two-loop architecture: a question quality loop that screens and selects feasible hypotheses, and a research revision loop where automated review triggers re-analysis and manuscript revision. Human decision gates are embedded at key stages, allowing researchers to guide the automated pipeline. Experiments on three empirical datasets show that dataset-aware hypothesis generation produces feasible research questions in 87% of cases (versus 41% under unconstrained generation), while complete empirical manuscripts can be produced at an average API cost of 0.8-1.5 per run. These results suggest that Human-AI collaborative pipelines may provide a practical path toward scalable empirical research.

Training deep research agents requires long-horizon trajectories that interleave search, evidence aggregation, and multi-step reasoning. However, existing data collection pipelines typically rely on proprietary web APIs, making large-scale trajectory synthesis costly, unstable, and difficult to reproduce. We present OpenResearcher, a reproducible pipeline that decouples one-time corpus bootstrapping from multi-turn trajectory synthesis and executes the search-and-browse loop entirely offline using three explicit browser primitives: search, open, and find, over a 15M-document corpus. Using GPT-OSS-120B as the teacher model, we synthesize over 97K trajectories, including a substantial long-horizon tail with 100+ tool calls. Supervised fine-tuning a 30B-A3B backbone on these trajectories achieves 54.8\% accuracy on BrowseComp-Plus, a +34.0 point improvement over the base model, while remaining competitive on BrowseComp, GAIA, and xbench-DeepSearch. Because the environment is offline and fully instrumented, it also enables controlled analysis, where our study reveals practical insights into deep research pipeline design, including data filtering strategies, agent configuration choices, and how retrieval success relates to final answer accuracy. We release the pipeline, synthesized trajectories, model checkpoints, and the offline search environment at https://github.com/TIGER-AI-Lab/OpenResearcher.

We present a generic framework for creating differentially private versions of any hypothesis test in a black-box way. We analyze the resulting tests analytically and experimentally. Most crucially, we show good practical performance for small data sets, showing that at epsilon = 1 we only need 5-6 times as much data as in the fully public setting. We compare our work to the one existing framework of this type, as well as to several individually-designed private hypothesis tests. Our framework is higher power than other generic solutions and at least competitive with (and often better than) individually-designed tests.

Machine learning models trained on Earth observation data, such as satellite imagery, have demonstrated significant promise in predicting household-level wealth indices, enabling the creation of high-resolution wealth maps that can be leveraged across multiple causal trials. However, because standard training objectives prioritize overall predictive accuracy, these predictions inherently suffer from shrinkage toward the mean, leading to attenuated estimates of causal treatment effects and limiting their utility in policy. Existing debiasing methods, such as Prediction-Powered Inference, can handle this attenuation bias but require additional fresh ground-truth data at the downstream stage of causal inference, which restricts their applicability in data-scarce environments. Here, we introduce and evaluate two correction methods -- linear calibration correction and Tweedie's correction -- that substantially reduce prediction bias without relying on newly collected labeled data. Linear calibration corrects bias through a straightforward linear transformation derived from held-out calibration data, whereas Tweedie's correction leverages empirical Bayes principles to directly address shrinkage-induced biases by exploiting score functions derived from the model's learning patterns. Through analytical exercises and experiments using Demographic and Health Survey data, we demonstrate that the proposed methods meet or outperform existing approaches that either require (a) adjustments to training pipelines or (b) additional labeled data. These approaches may represent a promising avenue for improving the reliability of causal inference when direct outcome measures are limited or unavailable, enabling a "one map, many trials" paradigm where a single upstream data creation team produces predictions usable by many downstream teams across diverse ML pipelines.

Chain-of-thought (CoT) monitoring is a promising tool for detecting misbehaviors and understanding the motivations of modern reasoning models. However, if models can control what they verbalize in their CoT, it could undermine CoT monitorability. To measure this undesirable capability -- CoT controllability -- we introduce the CoT-Control evaluation suite, which includes tasks that require models to solve problems while adhering to CoT instructions, e.g., reasoning about a genetics question without using the word 'chromosome'. We show that reasoning models possess significantly lower CoT controllability than output controllability; for instance, Claude Sonnet 4.5 can control its CoT only 2.7% of the time but 61.9% when controlling its final output. We also find that CoT controllability is higher for larger models and decreases with more RL training, test-time compute, and increased problem difficulty. CoT controllability failures extend even to situations in which models are given incentives (as opposed to direct requests) to evade CoT monitors, although models exhibit slightly higher controllability when they are told they are being monitored. Similarly, eliciting controllability by adversarially optimizing prompts does not meaningfully increase controllability. Our results leave us cautiously optimistic that CoT controllability is currently unlikely to be a failure mode of CoT monitorability. However, the mechanism behind low controllability is not well understood. Given its importance for maintaining CoT monitorability, we recommend that frontier labs track CoT controllability in future models.

Autonomous research systems increasingly make the scientific workflow executable: agents can propose ideas, run code, inspect results, and draft papers. But executable workflows do not by themselves produce research judgment. We analyze where current systems lose trial experience: weak evidence becomes prose, pilot signals become broad claims, memory remains textual, and recurring process failures do not change later behavior. We introduce Sibyl-AutoResearch, a self-evolving AutoResearch framework built around Scientific Trial-and-Error Harnesses. A harness lets agents run bounded trials, preserve positive and negative outcomes, and route lessons into later planning, validation, claim scope, scheduling, critique, writing, and harness repair. We formalize this through two auditable conversion units: trial-to-behavior conversion, which links trial signals to later research actions, and trial-to-harness-behavior conversion, which links recurring process failures to system updates. We implement the framework in SIBYL, a file-backed autonomous research system that exposes the state, roles, memory, gates, and artifact traces needed to inspect these conversion paths. A retrospective audit identifies eight high-confidence conversion events, with a median latency of one iteration and a maximum latency of three iterations. A recovered-failure registry further shows how five naturally occurring failure classes, including duplicate results, stale numbers, and unsupported statistics, were blocked, downgraded, or routed into later repair. These traces do not establish a comparative performance claim; they show that the proposed conversion units are recoverable from realistic autonomous-research workspaces. The SIBYL framework and system are available at https://github.com/Sibyl-Research-Team/AutoResearch-SibylSystem.

Scientific discovery is a closed-loop process in which hypotheses guide data acquisition and observations refine the hypothesis space. Yet most approaches reduce discovery to supervised learning over fixed datasets, where limited observations can support multiple plausible mechanisms that fit locally but fail to generalize. Thus, the key challenge is selecting informative observations to resolve uncertainty, shifting the focus from static inference to adaptive data acquisition. To address this, we propose LLM-AutoSciLab, a closed-loop framework that couples hypothesis generation with hypothesis-conditioned experiment selection and mechanism refinement. Rather than fitting models to passively collected data, LLM-AutoSciLab iteratively proposes plausible hypotheses, selects informative experiments to distinguish or refine them, and updates its state using the resulting evidence. To evaluate dynamic, closed-loop scientific discovery with active data acquisition, we introduce ActiveSciBench, comprising two datasets: ActiveSciBench-Chem with 57 enzyme-kinetics tasks and ActiveSciBench-GRN with 45 gene-regulatory-network tasks. These datasets model discovery as a budget-constrained process requiring adaptive experiment design, variable selection, and recovery of true mechanisms. Across NewtonBench, ActiveSciBench-Chem, and ActiveSciBench-GRN, LLM-AutoSciLab outperforms prior methods, achieving 67.6% and 35.1% symbolic accuracy on NewtonBench and ActiveSciBench-Chem, respectively, and 31.1% exact graph recovery on ActiveSciBench-GRN. Moreover, hypothesis-guided experimentation is 2-5x more sample-efficient than the strongest competing baselines. Code and data are available at: https://github.com/scientific-discovery/LLM-AutoSciLab

Synthesizing inductive loop invariants is fundamental to automating program verification. In this work, we observe that Large Language Models (such as gpt-3.5 or gpt-4) are capable of synthesizing loop invariants for a class of programs in a 0-shot setting, yet require several samples to generate the correct invariants. This can lead to a large number of calls to a program verifier to establish an invariant. To address this issue, we propose a {\it re-ranking} approach for the generated results of LLMs. We have designed a ranker that can distinguish between correct inductive invariants and incorrect attempts based on the problem definition. The ranker is optimized as a contrastive ranker. Experimental results demonstrate that this re-ranking mechanism significantly improves the ranking of correct invariants among the generated candidates, leading to a notable reduction in the number of calls to a verifier.

AI scientist systems, capable of autonomously executing the full research workflow from hypothesis generation and experimentation to paper writing, hold significant potential for accelerating scientific discovery. However, the internal workflow of these systems have not been closely examined. This lack of scrutiny poses a risk of introducing flaws that could undermine the integrity, reliability, and trustworthiness of their research outputs. In this paper, we identify four potential failure modes in contemporary AI scientist systems: inappropriate benchmark selection, data leakage, metric misuse, and post-hoc selection bias. To examine these risks, we design controlled experiments that isolate each failure mode while addressing challenges unique to evaluating AI scientist systems. Our assessment of two prominent open-source AI scientist systems reveals the presence of several failures, across a spectrum of severity, which can be easily overlooked in practice. Finally, we demonstrate that access to trace logs and code from the full automated workflow enables far more effective detection of such failures than examining the final paper alone. We thus recommend journals and conferences evaluating AI-generated research to mandate submission of these artifacts alongside the paper to ensure transparency, accountability, and reproducibility.

This paper introduces BioAgent Bench, a benchmark dataset and an evaluation suite designed for measuring the performance and robustness of AI agents in common bioinformatics tasks. The benchmark contains curated end-to-end tasks (e.g., RNA-seq, variant calling, metagenomics) with prompts that specify concrete output artifacts to support automated assessment, including stress testing under controlled perturbations. We evaluate frontier closed-source and open-weight models across multiple agent harnesses, and use an LLM-based grader to score pipeline progress and outcome validity. We find that frontier agents can complete multi-step bioinformatics pipelines without elaborate custom scaffolding, often producing the requested final artifacts reliably. However, robustness tests reveal failure modes under controlled perturbations (corrupted inputs, decoy files, and prompt bloat), indicating that correct high-level pipeline construction does not guarantee reliable step-level reasoning. Finally, because bioinformatics workflows may involve sensitive patient data, proprietary references, or unpublished IP, closed-source models can be unsuitable under strict privacy constraints; in such settings, open-weight models may be preferable despite lower completion rates. We release the dataset and evaluation suite publicly.

A common pipeline in learning-based control is to iteratively estimate a model of system dynamics, and apply a trajectory optimization algorithm - e.g.~iLQR - on the learned model to minimize a target cost. This paper conducts a rigorous analysis of a simplified variant of this strategy for general nonlinear systems. We analyze an algorithm which iterates between estimating local linear models of nonlinear system dynamics and performing iLQR-like policy updates. We demonstrate that this algorithm attains sample complexity polynomial in relevant problem parameters, and, by synthesizing locally stabilizing gains, overcomes exponential dependence in problem horizon. Experimental results validate the performance of our algorithm, and compare to natural deep-learning baselines.

This paper considers the problem of variable selection allowing for parameter instability. It distinguishes between signal and pseudo-signal variables that are correlated with the target variable, and noise variables that are not, and investigate the asymptotic properties of the One Covariate at a Time Multiple Testing (OCMT) method proposed by Chudik et al. (2018) under parameter insatiability. It is established that OCMT continues to asymptotically select an approximating model that includes all the signals and none of the noise variables. Properties of post selection regressions are also investigated, and in-sample fit of the selected regression is shown to have the oracle property. The theoretical results support the use of unweighted observations at the selection stage of OCMT, whilst applying down-weighting of observations only at the forecasting stage. Monte Carlo and empirical applications show that OCMT without down-weighting at the selection stage yields smaller mean squared forecast errors compared to Lasso, Adaptive Lasso, and boosting.

This paper presents the Neural Network Verification (NNV) software tool, a set-based verification framework for deep neural networks (DNNs) and learning-enabled cyber-physical systems (CPS). The crux of NNV is a collection of reachability algorithms that make use of a variety of set representations, such as polyhedra, star sets, zonotopes, and abstract-domain representations. NNV supports both exact (sound and complete) and over-approximate (sound) reachability algorithms for verifying safety and robustness properties of feed-forward neural networks (FFNNs) with various activation functions. For learning-enabled CPS, such as closed-loop control systems incorporating neural networks, NNV provides exact and over-approximate reachability analysis schemes for linear plant models and FFNN controllers with piecewise-linear activation functions, such as ReLUs. For similar neural network control systems (NNCS) that instead have nonlinear plant models, NNV supports over-approximate analysis by combining the star set analysis used for FFNN controllers with zonotope-based analysis for nonlinear plant dynamics building on CORA. We evaluate NNV using two real-world case studies: the first is safety verification of ACAS Xu networks and the second deals with the safety verification of a deep learning-based adaptive cruise control system.

Are AI agents tools, co-authors, or researchers? We present a quantified case study (N=1): a physicist supervising an AI coding agent (Claude Code, Sonnet and Opus models) over 12 work days and 57 sessions to build CLAX-PT, a differentiable one-loop perturbation theory module in JAX. We documented and classified 15 supervision events by intervention level. The agent resolved ten autonomously by iterating against oracle tests. Two more by the physicist's domain knowledge. The three it could not -- all evaded oracle detection -- share a common property: the agent treated symptom reduction as root-cause resolution. It spent 33 of the 57 sessions adjusting coefficients within a code architecture that could not represent the target physics, and could not re-evaluate its CLASS-PT branch choice even when prompted to reconsider; only an injected physics concept (anisotropic BAO damping) triggered the redesign. Separately, the agent committed a calibrated correction that passed all oracle tests but corresponded to no quantity in the theory, predicting wrong values at any other cosmology. The fudge factor was caught and replaced within the same session. Three supervision practices proved critical for catching what oracle tests missed: testing at diverse parameter points beyond the fiducial calibration; shared changelogs that surfaced stalled exploration across sessions; and an explicit rule against unphysical numerical patches. In this case, supervision design, not model capability, determined whether the agent's output was trustworthy. Closing the gap would require agents that propose architectural alternatives rather than optimize within a given structure, and distinguish predictive adequacy from explanatory correctness -- capabilities not exhibited here, not obviously addressed by scaling alone. [Abridged.]

As autonomous AI agents are used in regulated and safety-critical settings, organizations need effective ways to turn policy into enforceable controls. We introduce a regulatory machine learning framework that converts unstructured design artifacts (like PRDs, TDDs, and code) into verifiable runtime guardrails. Our Policy as Prompt method reads these documents and risk controls to build a source-linked policy tree. This tree is then compiled into lightweight, prompt-based classifiers for real-time runtime monitoring. The system is built to enforce least privilege and data minimization. For conformity assessment, it provides complete provenance, traceability, and audit logging, all integrated with a human-in-the-loop review process. Evaluations show our system reduces prompt-injection risk, blocks out-of-scope requests, and limits toxic outputs. It also generates auditable rationales aligned with AI governance frameworks. By treating policies as executable prompts (a policy-as-code for agents), this approach enables secure-by-design deployment, continuous compliance, and scalable AI safety and AI security assurance for regulatable ML.

A central puzzle for the behavioural sciences and for human-facing artificial intelligence is the persistence of within-person variability. The same individual, presented with the same observable input, produces different outcomes on different occasions, and different individuals produce divergent outcomes that no observable covariate fully predicts. We argue that this variability belongs in the dynamic latent state of the person, and that human outcomes are controllable in a precise and operational sense through interventions that target the state and its weighting at the moment a decision is being formed. We define a state as the time-indexed weighting vector over the dimensions that govern how an individual's biology, physiology, and neuropsychology process the next event into a decision and an outcome. The relationship between state, decision, and outcome is causal rather than correlational. The weighting vector is dynamic at sub-daily timescales. The conscious channel through which outcomes are reportable is a narrow attentional bottleneck whose contents are themselves state-dependent. Taken together, these claims imply that the outcome of a given event is controllable, conditionally, on the state-trajectory at the time of intervention. We motivate the framework with six strands of established evidence (causal inference, predictive processing, allostasis, attentional bottleneck, chronobiology, computational psychiatry) and a 24-month observational base from a deployed behavioural platform spanning more than 200,000 consented users across four occupational personas (research period 2023 to 2026). We derive seven testable predictions, list six operational requirements for state-aware systems, and discuss implications for digital health, education, AI personalisation, and personal agency.

Over the past three decades, numerous controllers have been developed to regulate complex chemical processes, but they have certain limitations. Traditional PI/PID controllers often require customized tuning for various set-point scenarios. On the other hand, MPC frameworks involve resource-intensive steps, and the utilization of black-box machine learning (ML) models can lead to issues such as local minima and infeasibility. Thus, there is a need for an alternative controller paradigm that combines the simplicity of a PI controller with the grade-to-grade (G2G) transferability of an MPC approach. To this end, we developed a novel LSTM controller (LSTMc) as a model-free data-driven controller framework. The LSTMc considers an augmented input tensor that incorporates information on state evolution and error dynamics for the current and previous W time steps, to predict the manipulated input at the next step (u_{t+1}). To demonstrate LSTMc, batch crystallization of dextrose was taken as a representative case study. The desired output for set-point tracking was the mean crystal size (L), with the manipulated input being the jacket temperature (T_j). Extensive training data, encompassing 7000+ different operating conditions, was compiled to ensure comprehensive training of LSTMc across a wide state space region. For comparison, we also designed a PI controller and an LSTM-MPC for different set-point tracking cases. The results consistently showed that LSTMc achieved the lowest set-point deviation (<2\%), three times lower than the MPC. Remarkably, LSTMc maintained this superior performance across all set points, even when sensor measurements contained noise levels of 10\% to 15\%. In summary, by effectively leveraging process data and utilizing sequential ML models, LSTMc offers a superior controller design approach.

Looped Language Models (LoopLMs) perform multi-step latent reasoning prior to token generation and outperform conventional LLMs on reasoning benchmarks at smaller parameter budgets. However, attempts to further improve LoopLM reasoning with reinforcement learning have failed - standard objectives such as Group Relative Policy Optimization (GRPO) only assign credit to the final latent state, creating a fundamental mismatch with the model's internal computation. To resolve this, we introduce RLTT (Reward Latent Thought Trajectories), a reinforcement learning framework which distributes reward across the full latent reasoning trajectory. RLTT provides dense, trajectory-level credit assignment without relying on external verifiers and can directly replace GRPO with negligible overhead. Across extensive experiments with Ouro-2.6B-Thinking under identical training and inference conditions, RLTT yields substantial improvements over GRPO on challenging mathematical reasoning benchmarks, improving accuracy by +14.4% on MATH-500, +16.6% on AIME24, and +10.0% on BeyondAIME. Despite being trained exclusively on mathematics, RLTT also transfers effectively to non-mathematical reasoning benchmarks, demonstrating the effectiveness of trajectory-level credit assignment for reinforcement learning in LoopLMs.

On-policy distillation (OPD), which supervises a student on its own sampled trajectories, has emerged as a data-efficient post-training method for improving reasoning while avoiding the reward dependence of reinforcement learning and the catastrophic forgetting often observed in standard supervised fine-tuning. However, standard OPD typically computes teacher supervision under noisy student-generated contexts and often relies on a single stochastic teacher rollout per prompt. As a result, the supervision signal can be high-variance: the sampled teacher trajectory can be incorrect, uninformative, or poorly matched to the student's current reasoning behavior. To address this limitation, we propose BRTS, a Best-of-N Rollout Teacher Selection framework for on-policy distillation. BRTS augments standard student-context OPD with a teacher-context supervision branch constructed from the curated teacher trajectory. Rather than distilling from the first sampled teacher rollout, BRTS samples a small pool of teacher trajectories and selects the auxiliary trajectory using a simple priority rule: correctness first, student alignment second. When multiple correct teacher trajectories are available, BRTS chooses the one most aligned with the student's current behavior; when unconditioned teacher samples fail on harder prompts, it invokes a ground-truth-conditioned recovery step to elicit a natural derivation. The selected trajectory is then used to provide reliable teacher-context supervision inside the OPD loop, augmented with an auxiliary loss on the teacher trajectory. Experiments on AIME 2024, AIME 2025, and AMC 2023 show that BRTS improves over standard OPD on challenging reasoning benchmarks, with the largest gains on harder datasets. Our code is available at https://github.com/BWGZK-keke/BRTS.

LLM agents excel when environments are mostly static and the needed information fits in a model's context window, but they often fail in open-ended investigations where explanations must be constructed by iteratively mining evidence from massive, heterogeneous operational data. These investigations exhibit hidden dependency structure: entities interact, signals co-vary, and the importance of a fact may only become clear after other evidence is discovered. Because the context window is bounded, agents must summarize intermediate findings before their significance is known, increasing the risk of discarding key evidence. ReAct-style agents are especially brittle in this regime. Their retrieve-summarize-reason loop makes conclusions sensitive to exploration order and introduces run-to-run non-determinism, producing a reliability gap where Pass-at-k may be high but Majority-at-k remains low. Simply sampling more rollouts or generating longer reasoning traces does not reliably stabilize results, since hypotheses cannot be autonomously checked as new evidence arrives and there is no explicit mechanism for belief bookkeeping and revision. In addition, ReAct entangles semantic reasoning with controller duties such as tool orchestration and state tracking, so execution errors and plan drift degrade reasoning while consuming scarce context. We address these issues by formulating investigation as abductive reasoning over a dependency graph and proposing EoG (Explanations over Graphs), a disaggregated framework in which an LLM performs bounded local evidence mining and labeling (cause vs symptom) while a deterministic controller manages traversal, state, and belief propagation to compute a minimal explanatory frontier. On a representative ITBench diagnostics task, EoG improves both accuracy and run-to-run consistency over ReAct baselines, including a 7x average gain in Majority-at-k entity F1.

Reinforcement learning (RL) for continuous control often requires large amounts of online interaction data. Value-based RL methods can mitigate this burden by offering relatively high sample efficiency. Some studies further enhance sample efficiency by incorporating offline demonstration data to "kick-start" training, achieving promising results in continuous control. However, they typically compute the Q-function independently for each action dimension, neglecting interdependencies and making it harder to identify optimal actions when learning from suboptimal data, such as non-expert demonstration and online-collected data during the training process. To address these issues, we propose Auto-Regressive Soft Q-learning (ARSQ), a value-based RL algorithm that models Q-values in a coarse-to-fine, auto-regressive manner. First, ARSQ decomposes the continuous action space into discrete spaces in a coarse-to-fine hierarchy, enhancing sample efficiency for fine-grained continuous control tasks. Next, it auto-regressively predicts dimensional action advantages within each decision step, enabling more effective decision-making in continuous control tasks. We evaluate ARSQ on two continuous control benchmarks, RLBench and D4RL, integrating demonstration data into online training. On D4RL, which includes non-expert demonstrations, ARSQ achieves an average 1.62times performance improvement over SOTA value-based baseline. On RLBench, which incorporates expert demonstrations, ARSQ surpasses various baselines, demonstrating its effectiveness in learning from suboptimal online-collected data. Project page is at https://sites.google.com/view/ar-soft-q

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

Due to the high efficiency and less weather dependency, autonomous greenhouses provide an ideal solution to meet the increasing demand for fresh food. However, managers are faced with some challenges in finding appropriate control strategies for crop growth, since the decision space of the greenhouse control problem is an astronomical number. Therefore, an intelligent closed-loop control framework is highly desired to generate an automatic control policy. As a powerful tool for optimal control, reinforcement learning (RL) algorithms can surpass human beings' decision-making and can also be seamlessly integrated into the closed-loop control framework. However, in complex real-world scenarios such as agricultural automation control, where the interaction with the environment is time-consuming and expensive, the application of RL algorithms encounters two main challenges, i.e., sample efficiency and safety. Although model-based RL methods can greatly mitigate the efficiency problem of greenhouse control, the safety problem has not got too much attention. In this paper, we present a model-based robust RL framework for autonomous greenhouse control to meet the sample efficiency and safety challenges. Specifically, our framework introduces an ensemble of environment models to work as a simulator and assist in policy optimization, thereby addressing the low sample efficiency problem. As for the safety concern, we propose a sample dropout module to focus more on worst-case samples, which can help improve the adaptability of the greenhouse planting policy in extreme cases. Experimental results demonstrate that our approach can learn a more effective greenhouse planting policy with better robustness than existing methods.

The training and deployment of large language models (LLMs) create a feedback loop with human users: models learn human beliefs from data, reinforce these beliefs with generated content, reabsorb the reinforced beliefs, and feed them back to users again and again. This dynamic resembles an echo chamber. We hypothesize that this feedback loop entrenches the existing values and beliefs of users, leading to a loss of diversity and potentially the lock-in of false beliefs. We formalize this hypothesis and test it empirically with agent-based LLM simulations and real-world GPT usage data. Analysis reveals sudden but sustained drops in diversity after the release of new GPT iterations, consistent with the hypothesized human-AI feedback loop. Code and data available at https://thelockinhypothesis.com

Tool-using automation systems, from scripts and CI bots to agentic assistants, fail in recurring patterns. Common failures include unsafe side effects, invalid arguments, uncontrolled retries, and leakage of sensitive outputs. Many mitigations are model-centric and prompt-dependent, so they are brittle and do not generalize to non-LLM callers. We present Policy-First Tooling, a model-agnostic permission layer that mediates tool invocation through explicit constraints, risk-aware gating, recovery controls, and auditable explanations. The paper contributes a compact policy DSL, a runtime enforcement architecture with actionable rationale and fix hints, and a reproducible benchmark based on trace replay with controlled fault and misuse injection. In 225 controlled runs across five policy packs and three fault profiles, stricter packs improve violation prevention from 0.000 in P0 to 0.681 in P4, while task success drops from 0.356 to 0.067. Retry amplification decreases from 3.774 in P0 to 1.378 in P4, and leakage recall reaches 0.875 under injected secret outputs. These results make safety to utility trade-offs explicit and measurable.

Recent advances in real-world applications of reinforcement learning (RL) have relied on the ability to accurately simulate systems at scale. However, domains such as fluid dynamical systems exhibit complex dynamic phenomena that are hard to simulate at high integration rates, limiting the direct application of modern deep RL algorithms to often expensive or safety critical hardware. In this work, we introduce "Box o Flows", a novel benchtop experimental control system for systematically evaluating RL algorithms in dynamic real-world scenarios. We describe the key components of the Box o Flows, and through a series of experiments demonstrate how state-of-the-art model-free RL algorithms can synthesize a variety of complex behaviors via simple reward specifications. Furthermore, we explore the role of offline RL in data-efficient hypothesis testing by reusing past experiences. We believe that the insights gained from this preliminary study and the availability of systems like the Box o Flows support the way forward for developing systematic RL algorithms that can be generally applied to complex, dynamical systems. Supplementary material and videos of experiments are available at https://sites.google.com/view/box-o-flows/home.

In causal inference, estimating heterogeneous treatment effects (HTE) is critical for identifying how different subgroups respond to interventions, with broad applications in fields such as precision medicine and personalized advertising. Although HTE estimation methods aim to improve accuracy, how to provide explicit subgroup descriptions remains unclear, hindering data interpretation and strategic intervention management. In this paper, we propose CURLS, a novel rule learning method leveraging HTE, which can effectively describe subgroups with significant treatment effects. Specifically, we frame causal rule learning as a discrete optimization problem, finely balancing treatment effect with variance and considering the rule interpretability. We design an iterative procedure based on the minorize-maximization algorithm and solve a submodular lower bound as an approximation for the original. Quantitative experiments and qualitative case studies verify that compared with state-of-the-art methods, CURLS can find subgroups where the estimated and true effects are 16.1% and 13.8% higher and the variance is 12.0% smaller, while maintaining similar or better estimation accuracy and rule interpretability. Code is available at https://osf.io/zwp2k/.

Autonomous GUI agents face two fundamental challenges: early stopping, where agents prematurely declare success without verifiable evidence, and repetitive loops, where agents cycle through the same failing actions without recovery. We present VLAA-GUI, a modular GUI agentic framework built around three integrated components that guide the system on when to Stop, Recover, and Search. First, a mandatory Completeness Verifier enforces UI-observable success criteria and verification at every finish step -- with an agent-level verifier that cross-examines completion claims with decision rules, rejecting those lacking direct visual evidence. Second, a mandatory Loop Breaker provides multi-tier filtering: switching interaction mode after repeated failures, forcing strategy changes after persistent screen-state recurrence, and binding reflection signals to strategy shifts. Third, an on-demand Search Agent searches online for unfamiliar workflows by directly querying a capable LLM with search ability, returning results as plain text. We additionally integrate a Coding Agent for code-intensive actions and a Grounding Agent for precise action grounding, both invoked on demand when required. We evaluate VLAA-GUI across five top-tier backbones, including Opus 4.5, 4.6 and Gemini 3.1 Pro, on two benchmarks with Linux and Windows tasks, achieving top performance on both (77.5% on OSWorld and 61.0% on WindowsAgentArena). Notably, three of the five backbones surpass human performance (72.4%) on OSWorld in a single pass. Ablation studies show that all three proposed components consistently improve a strong backbone, while a weaker backbone benefits more from these tools when the step budget is sufficient. Further analysis also shows that the Loop Breaker nearly halves wasted steps for loop-prone models.

Reinforcement Learning with Verifiable Rewards (RLVR) elicits long chain-of-thought reasoning in large language models (LLMs), but outcome-based rewards lead to coarse-grained advantage estimation. While existing approaches improve RLVR via token-level entropy or sequence-level length control, they lack a semantically grounded, step-level measure of reasoning progress. As a result, LLMs fail to distinguish necessary deduction from redundant verification: they may continue checking after reaching a correct solution and, in extreme cases, overturn a correct trajectory into an incorrect final answer. To remedy the lack of process supervision, we introduce a training-free probing mechanism that extracts intermediate confidence and correctness and combines them into a Step Potential signal that explicitly estimates the reasoning state at each step. Building on this signal, we propose Step Potential Advantage Estimation (SPAE), a fine-grained credit assignment method that amplifies potential gains, penalizes potential drops, and applies penalty after potential saturates to encourage timely termination. Experiments across multiple benchmarks show SPAE consistently improves accuracy while substantially reducing response length, outperforming strong RL baselines and recent efficient reasoning and token-level advantage estimation methods. The code is available at https://github.com/cii030/SPAE-RL.

Individual agent capabilities have advanced rapidly through modular skills and tool integrations, yet multi-agent systems remain constrained by fixed team structures, tightly coupled coordination logic, and session-bound learning. We argue that this reflects a deeper absence: a principled organisational layer that governs how a workforce of agents is assembled, governed, and improved over time, decoupled from what individual agents know. To fill this gap, we introduce OneManCompany (OMC), a framework that elevates multi-agent systems to the organisational level. OMC encapsulates skills, tools, and runtime configurations into portable agent identities called Talents, orchestrated through typed organisational interfaces that abstract over heterogeneous backends. A community-driven Talent Market enables on-demand recruitment, allowing the organisation to close capability gaps and reconfigure itself dynamically during execution. Organisational decision-making is operationalised through an Explore-Execute-Review (E^2R) tree search, which unifies planning, execution, and evaluation in a single hierarchical loop: tasks are decomposed top-down into accountable units and execution outcomes are aggregated bottom-up to drive systematic review and refinement. This loop provides formal guarantees on termination and deadlock freedom while mirroring the feedback mechanisms of human enterprises. Together, these contributions transform multi-agent systems from static, pre-configured pipelines into self-organising and self-improving AI organisations capable of adapting to open-ended tasks across diverse domains. Empirical evaluation on PRDBench shows that OMC achieves an 84.67% success rate, surpassing the state of the art by 15.48 percentage points, with cross-domain case studies further demonstrating its generality.

Model selection/optimization in conformal inference is challenging, since it may break the exchangeability between labeled and unlabeled data. We study this problem in the context of conformal selection, which uses conformal p-values to select ``interesting'' instances with large unobserved labels from a pool of unlabeled data, while controlling the FDR in finite sample. For validity, existing solutions require the model choice to be independent of the data used to construct the p-values and calibrate the selection set. However, when presented with many model choices and limited labeled data, it is desirable to (i) select the best model in a data-driven manner, and (ii) mitigate power loss due to sample splitting. This paper presents OptCS, a general framework that allows valid statistical testing (selection) after flexible data-driven model optimization. We introduce general conditions under which OptCS constructs valid conformal p-values despite substantial data reuse and handles complex p-value dependencies to maintain finite-sample FDR control via a novel multiple testing procedure. We instantiate this general recipe to propose three FDR-controlling procedures, each optimizing the models differently: (i) selecting the most powerful one among multiple pre-trained candidate models, (ii) using all data for model fitting without sample splitting, and (iii) combining full-sample model fitting and selection. We demonstrate the efficacy of our methods via simulation studies and real applications in drug discovery and alignment of large language models in radiology report generation.

Randomized controlled trials (RCTs) are considered the gold standard for estimating the average treatment effect (ATE) of interventions. One use of RCTs is to study the causes of global poverty -- a subject explicitly cited in the 2019 Nobel Memorial Prize awarded to Duflo, Banerjee, and Kremer "for their experimental approach to alleviating global poverty." Because the ATE is a population summary, anti-poverty experiments often seek to unpack the effect variation around the ATE by conditioning (CATE) on tabular variables such as age and ethnicity that were measured during the RCT data collection. Although such variables are key to unpacking CATE, using only such variables may fail to capture historical, geographical, or neighborhood-specific contributors to effect variation, as tabular RCT data are often only observed near the time of the experiment. In global poverty research, when the location of the experiment units is approximately known, satellite imagery can provide a window into such factors important for understanding heterogeneity. However, there is no method that specifically enables applied researchers to analyze CATE from images. In this paper, using a deep probabilistic modeling framework, we develop such a method that estimates latent clusters of images by identifying images with similar treatment effects distributions. Our interpretable image CATE model also includes a sensitivity factor that quantifies the importance of image segments contributing to the effect cluster prediction. We compare the proposed methods against alternatives in simulation; also, we show how the model works in an actual RCT, estimating the effects of an anti-poverty intervention in northern Uganda and obtaining a posterior predictive distribution over effects for the rest of the country where no experimental data was collected. We make all models available in open-source software.

We study regressions with multiple treatments and a set of controls that is flexible enough to purge omitted variable bias. We show that these regressions generally fail to estimate convex averages of heterogeneous treatment effects -- instead, estimates of each treatment's effect are contaminated by non-convex averages of the effects of other treatments. We discuss three estimation approaches that avoid such contamination bias, including the targeting of easiest-to-estimate weighted average effects. A re-analysis of nine empirical applications finds economically and statistically meaningful contamination bias in observational studies; contamination bias in experimental studies is more limited due to smaller variability in propensity scores.

With the rise of vision-language models (VLM), their application for autonomous driving (VLM4AD) has gained significant attention. Meanwhile, in autonomous driving, closed-loop evaluation has become widely recognized as a more reliable validation method than open-loop evaluation, as it can evaluate the performance of the model under cumulative errors and out-of-distribution inputs. However, existing VLM4AD benchmarks evaluate the model`s scene understanding ability under open-loop, i.e., via static question-answer (QA) dataset. This kind of evaluation fails to assess the VLMs performance under out-of-distribution states rarely appeared in the human collected datasets.To this end, we present Bench2Drive-VL, an extension of Bench2Drive that brings closed-loop evaluation to VLM-based driving, which introduces: (1) DriveCommenter, a closed-loop generator that automatically generates diverse, behavior-grounded question-answer pairs for all driving situations in CARLA,including severe off-route and off-road deviations previously unassessable in simulation. (2) A unified protocol and interface that allows modern VLMs to be directly plugged into the Bench2Drive closed-loop environment to compare with traditional agents. (3) A flexible reasoning and control framework, supporting multi-format visual inputs and configurable graph-based chain-of-thought execution. (4) A complete development ecosystem. Together, these components form a comprehensive closed-loop benchmark for VLM4AD. All codes and annotated datasets are open sourced.

With the advent of large language models (LLMs) like GPT-3, a natural question is the extent to which these models can be utilized for source code optimization. This paper presents methodologically stringent case studies applied to well-known open source python libraries pillow and numpy. We find that contemporary LLM ChatGPT-4 (state September and October 2023) is surprisingly adept at optimizing energy and compute efficiency. However, this is only the case in interactive use, with a human expert in the loop. Aware of experimenter bias, we document our qualitative approach in detail, and provide transcript and source code. We start by providing a detailed description of our approach in conversing with the LLM to optimize the _getextrema function in the pillow library, and a quantitative evaluation of the performance improvement. To demonstrate qualitative replicability, we report further attempts on another locus in the pillow library, and one code locus in the numpy library, to demonstrate generalization within and beyond a library. In all attempts, the performance improvement is significant (factor up to 38). We have also not omitted reporting of failed attempts (there were none). We conclude that LLMs are a promising tool for code optimization in open source libraries, but that the human expert in the loop is essential for success. Nonetheless, we were surprised by how few iterations were required to achieve substantial performance improvements that were not obvious to the expert in the loop. We would like bring attention to the qualitative nature of this study, more robust quantitative studies would need to introduce a layer of selecting experts in a representative sample -- we invite the community to collaborate.

We present a complete Lean 4 formalization of the equilibrium characterization in the Vlasov-Maxwell-Landau (VML) system, which describes the motion of charged plasma. The project demonstrates the full AI-assisted mathematical research loop: an AI reasoning model (Gemini DeepThink) generated the proof from a conjecture, an agentic coding tool (Claude Code) translated it into Lean from natural-language prompts, a specialized prover (Aristotle) closed 111 lemmas, and the Lean kernel verified the result. A single mathematician supervised the process over 10 days at a cost of \$200, writing zero lines of code. The entire development process is public: all 229 human prompts, and 213 git commits are archived in the repository. We report detailed lessons on AI failure modes -- hypothesis creep, definition-alignment bugs, agent avoidance behaviors -- and on what worked: the abstract/concrete proof split, adversarial self-review, and the critical role of human review of key definitions and theorem statements. Notably, the formalization was completed before the final draft of the corresponding math paper was finished.

Datasets scraped from the internet have been critical to the successes of large-scale machine learning. Yet, this very success puts the utility of future internet-derived datasets at potential risk, as model outputs begin to replace human annotations as a source of supervision. In this work, we first formalize a system where interactions with one model are recorded as history and scraped as training data in the future. We then analyze its stability over time by tracking changes to a test-time bias statistic (e.g. gender bias of model predictions). We find that the degree of bias amplification is closely linked to whether the model's outputs behave like samples from the training distribution, a behavior which we characterize and define as consistent calibration. Experiments in three conditional prediction scenarios - image classification, visual role-labeling, and language generation - demonstrate that models that exhibit a sampling-like behavior are more calibrated and thus more stable. Based on this insight, we propose an intervention to help calibrate and stabilize unstable feedback systems. Code is available at https://github.com/rtaori/data_feedback.

The final goal of all industrial machine learning (ML) projects is to develop ML products and rapidly bring them into production. However, it is highly challenging to automate and operationalize ML products and thus many ML endeavors fail to deliver on their expectations. The paradigm of Machine Learning Operations (MLOps) addresses this issue. MLOps includes several aspects, such as best practices, sets of concepts, and development culture. However, MLOps is still a vague term and its consequences for researchers and professionals are ambiguous. To address this gap, we conduct mixed-method research, including a literature review, a tool review, and expert interviews. As a result of these investigations, we provide an aggregated overview of the necessary principles, components, and roles, as well as the associated architecture and workflows. Furthermore, we furnish a definition of MLOps and highlight open challenges in the field. Finally, this work provides guidance for ML researchers and practitioners who want to automate and operate their ML products with a designated set of technologies.

Template mining is one of the foundational tasks to support log analysis, which supports the diagnosis and troubleshooting of large scale Web applications. This paper develops a human-in-the-loop template mining framework to support interactive log analysis, which is highly desirable in real-world diagnosis or troubleshooting of Web applications but yet previous template mining algorithms fails to support it. We formulate three types of light-weight user feedbacks and based on them we design three atomic human-in-the-loop template mining algorithms. We derive mild conditions under which the outputs of our proposed algorithms are provably correct. We also derive upper bounds on the computational complexity and query complexity of each algorithm. We demonstrate the versatility of our proposed algorithms by combining them to improve the template mining accuracy of five representative algorithms over sixteen widely used benchmark datasets.

Consistently checking the statistical significance of experimental results is one of the mandatory methodological steps to address the so-called "reproducibility crisis" in deep reinforcement learning. In this tutorial paper, we explain how the number of random seeds relates to the probabilities of statistical errors. For both the t-test and the bootstrap confidence interval test, we recall theoretical guidelines to determine the number of random seeds one should use to provide a statistically significant comparison of the performance of two algorithms. Finally, we discuss the influence of deviations from the assumptions usually made by statistical tests. We show that they can lead to inaccurate evaluations of statistical errors and provide guidelines to counter these negative effects. We make our code available to perform the tests.

Purpose: General consensus amongst researchers and industry points to a lack of large, representative annotated datasets as the biggest obstacle to progress in the field of surgical data science. Self-supervised learning represents a solution to part of this problem, removing the reliance on annotations. However, the robustness of current self-supervised learning methods to domain shifts remains unclear, limiting our understanding of its utility for leveraging diverse sources of surgical data. Methods: In this work, we employ self-supervised learning to flexibly leverage diverse surgical datasets, thereby learning taskagnostic representations that can be used for various surgical downstream tasks. Based on this approach, to elucidate the impact of pre-training on downstream task performance, we explore 22 different pre-training dataset combinations by modulating three variables: source hospital, type of surgical procedure, and pre-training scale (number of videos). We then finetune the resulting model initializations on three diverse downstream tasks: namely, phase recognition and critical view of safety in laparoscopic cholecystectomy and phase recognition in laparoscopic hysterectomy. Results: Controlled experimentation highlights sizable boosts in performance across various tasks, datasets, and labeling budgets. However, this performance is intricately linked to the composition of the pre-training dataset, robustly proven through several study stages. Conclusion: The composition of pre-training datasets can severely affect the effectiveness of SSL methods for various downstream tasks and should critically inform future data collection efforts to scale the application of SSL methodologies. Keywords: Self-Supervised Learning, Transfer Learning, Surgical Computer Vision, Endoscopic Videos, Critical View of Safety, Phase Recognition

Recent advances in large language models for test case generation have improved branch coverage via prompt-engineered mutations. However, they still lack principled mechanisms for steering models toward specific high-risk execution branches, limiting their effectiveness for discovering subtle bugs and security vulnerabilities. We propose GLMTest, the first program structure-aware LLM framework for targeted test case generation that seamlessly integrates code property graphs and code semantics using a graph neural network and a language model to condition test case generation on execution branches. This structured conditioning enables controllable and branch-targeted test case generation, thereby potentially enhancing bug and security risk discovery. Experiments on real-world projects show that GLMTest built on a Qwen2.5-Coder-7B-Instruct model improves branch accuracy from 27.4% to 50.2% on TestGenEval benchmark compared with state-of-the-art LLMs, i.e., Claude-Sonnet-4.5 and GPT-4o-mini.

Partial correlations quantify linear association between two variables adjusting for the influence of the remaining variables. They form the backbone for graphical models and are readily obtained from the inverse of the covariance matrix. For compositional data, the covariance structure is specified from log ratios of variables, so unless we try to "open" the data via a normalization, this implies changes in the definition and interpretation of partial correlations. In the present work, we elucidate how results derived by Aitchison (1986) lead to a natural definition of partial correlation that has a number of advantages over current measures of association. For this, we show that the residuals of log-ratios between a variable with a reference, when adjusting for all remaining variables including the reference, are reference-independent. Since the reference itself can be controlled for, correlations between residuals are defined for the variables directly without the necessity to recur to ratios except when specifying which variables are partialled out. Thus, perhaps surprisingly, partial correlations do not have the problems commonly found with measures of pairwise association on compositional data. They are well-defined between two variables, are properly scaled, and allow for negative association. By design, they are subcompositionally incoherent, but they share this property with conventional partial correlations (where results change when adjusting for the influence of fewer variables). We discuss the equivalence with normalization-based approaches whenever the normalizing variables are controlled for. We also discuss the partial variances and correlations we obtain from a previously studied data set of Roman glass cups.

The complexity of laboratory environments requires solutions that simplify instrument interaction and enhance measurement automation. Traditional tools often require configuration, software, and programming skills, creating barriers to productivity. Previous approaches, including dedicated software suites and custom scripts, frequently fall short in providing user-friendly solutions that align with programming practices. We present LABIIUM, an AI-enhanced, zero-configuration measurement automation system designed to streamline experimental workflows and improve user productivity. LABIIUM integrates an AI assistant powered by Large Language Models (LLMs) to generate code. LABIIUM's Lab-Automation-Measurement Bridges (LAMBs) enable seamless instrument connectivity using standard tools such as VSCode and Python, eliminating setup overhead. To demonstrate its capabilities, we conducted experiments involving the measurement of the parametric transfer curve of a simple two-transistor inverting amplifier with a current source load. The AI assistant was evaluated using different prompt scenarios and compared with multiple models, including Claude Sonnet 3.5, Gemini Pro 1.5, and GPT-4o. An expert solution implementing the Gradient-Weighted Adaptive Stochastic Sampling (GWASS) method was used as a baseline. The solutions generated by the AI assistant were compared with the expert solution and a uniform linear sweep baseline with 10,000 points. The graph results show that the LLMs were able to successfully complete the most basic uniform sweep, but LLMs were unable to develop adaptive sweeping algorithms to compete with GWASS. The evaluation underscores LABIIUM's ability to enhance laboratory productivity and support digital transformation in research and industry, and emphasizes the future work required to improve LLM performance in Electronic Measurement Science Tasks.

Safety performance evaluation is critical for developing and deploying connected and automated vehicles (CAVs). One prevailing way is to design testing scenarios using prior knowledge of CAVs, test CAVs in these scenarios, and then evaluate their safety performances. However, significant differences between CAVs and prior knowledge could severely reduce the evaluation efficiency. Towards addressing this issue, most existing studies focus on the adaptive design of testing scenarios during the CAV testing process, but so far they cannot be applied to high-dimensional scenarios. In this paper, we focus on the adaptive safety performance evaluation by leveraging the testing results, after the CAV testing process. It can significantly improve the evaluation efficiency and be applied to high-dimensional scenarios. Specifically, instead of directly evaluating the unknown quantity (e.g., crash rates) of CAV safety performances, we evaluate the differences between the unknown quantity and known quantity (i.e., control variates). By leveraging the testing results, the control variates could be well designed and optimized such that the differences are close to zero, so the evaluation variance could be dramatically reduced for different CAVs. To handle the high-dimensional scenarios, we propose the sparse control variates method, where the control variates are designed only for the sparse and critical variables of scenarios. According to the number of critical variables in each scenario, the control variates are stratified into strata and optimized within each stratum using multiple linear regression techniques. We justify the proposed method's effectiveness by rigorous theoretical analysis and empirical study of high-dimensional overtaking scenarios.

This paper reports on the second "Throughput" phase of the Tracking Machine Learning (TrackML) challenge on the Codalab platform. As in the first "Accuracy" phase, the participants had to solve a difficult experimental problem linked to tracking accurately the trajectory of particles as e.g. created at the Large Hadron Collider (LHC): given O(10^5) points, the participants had to connect them into O(10^4) individual groups that represent the particle trajectories which are approximated helical. While in the first phase only the accuracy mattered, the goal of this second phase was a compromise between the accuracy and the speed of inference. Both were measured on the Codalab platform where the participants had to upload their software. The best three participants had solutions with good accuracy and speed an order of magnitude faster than the state of the art when the challenge was designed. Although the core algorithms were less diverse than in the first phase, a diversity of techniques have been used and are described in this paper. The performance of the algorithms are analysed in depth and lessons derived.

Clinical diagnosis is critical in medical practice, typically requiring a continuous and evolving process that includes primary diagnosis, differential diagnosis, and final diagnosis. However, most existing clinical diagnostic tasks are single-step processes, which does not align with the complex multi-step diagnostic procedures found in real-world clinical settings. In this paper, we propose a multi-step diagnostic task and annotate a clinical diagnostic dataset (MSDiagnosis). This dataset includes primary diagnosis, differential diagnosis, and final diagnosis questions. Additionally, we propose a novel and effective framework. This framework combines forward inference, backward inference, reflection, and refinement, enabling the LLM to self-evaluate and adjust its diagnostic results. To assess the effectiveness of our proposed method, we design and conduct extensive experiments. The experimental results demonstrate the effectiveness of the proposed method. We also provide a comprehensive experimental analysis and suggest future research directions for this task.

Formal specification is essential for rigorous program verification, yet writing correct specifications remains costly and difficult to automate. Although large language models (LLMs) and agents have shown promising progress, their true capabilities and failure modes remain unclear. We present the first systematic and contamination-aware study of LLM- and agent-based formal specification generation for C programs. We introduce LiveFMBench, a continuously evolving benchmark of 630 ACSL (ANSI/ISO C Specification Language)-annotated C programs, including 360 newly collected cases designed to mitigate data leakage. Using this benchmark, we evaluate direct prompting with different sampling sizes, reasoning-enabled (thinking mode) inference, the agentic pipeline, and perform a fine-grained failure analysis. Experimental results reveal that naive evaluation substantially overestimates performance because models under direct prompting may exhibit unfaithful behaviors, such as deceiving automated provers or ignoring code-context constraints; after excluding such cases, the true specification generation accuracy drops by approximately 20\%. We further find that both increased sampling and thinking mode significantly improve success rates, with smaller models benefiting more from thinking mode. Agentic pipelines are particularly effective under low sampling budgets and on harder datasets. Failure analysis further shows that incorrect loop invariants are the dominant error type, while agentic pipelines notably reduce assertion errors. These results expose fundamental limitations in current LLM-based approaches and suggest they remain far from replacing human-authored formal specifications. We release LiveFMBench at https://huggingface.co/datasets/fm-universe/Live-FM-Bench and all evaluation artifacts to support future research.

Testing and evaluation is a critical step in the development and deployment of connected and automated vehicles (CAVs). Due to the black-box property and various types of CAVs, how to test and evaluate CAVs adaptively remains a major challenge. Many approaches have been proposed to adaptively generate testing scenarios during the testing process. However, most existing approaches cannot be applied to complex scenarios, where the variables needed to define such scenarios are high dimensional. Towards filling this gap, the adaptive testing with sparse control variates method is proposed in this paper. Instead of adaptively generating testing scenarios, our approach evaluates CAVs' performances by adaptively utilizing the testing results. Specifically, each testing result is adjusted using multiple linear regression techniques based on control variates. As the regression coefficients can be adaptively optimized for the CAV under test, using the adjusted results can reduce the estimation variance, compared with using the testing results directly. To overcome the high dimensionality challenge, sparse control variates are utilized only for the critical variables of testing scenarios. To validate the proposed method, the high-dimensional overtaking scenarios are investigated, and the results demonstrate that our approach can further accelerate the evaluation process by about 30 times.

We introduce ``LAMBDA," a novel open-source, code-free multi-agent data analysis system that that harnesses the power of large models. LAMBDA is designed to address data analysis challenges in complex data-driven applications through the use of innovatively designed data agents that operate iteratively and generatively using natural language. At the core of LAMBDA are two key agent roles: the programmer and the inspector, which are engineered to work together seamlessly. Specifically, the programmer generates code based on the user's instructions and domain-specific knowledge, enhanced by advanced models. Meanwhile, the inspector debugs the code when necessary. To ensure robustness and handle adverse scenarios, LAMBDA features a user interface that allows direct user intervention in the operational loop. Additionally, LAMBDA can flexibly integrate external models and algorithms through our knowledge integration mechanism, catering to the needs of customized data analysis. LAMBDA has demonstrated strong performance on various machine learning datasets. It has the potential to enhance data science practice and analysis paradigm by seamlessly integrating human and artificial intelligence, making it more accessible, effective, and efficient for individuals from diverse backgrounds. The strong performance of LAMBDA in solving data science problems is demonstrated in several case studies, which are presented at https://www.polyu.edu.hk/ama/cmfai/lambda.html.

Hampering the interpretation of benchmark scores, evaluation data contamination has become a growing concern in the evaluation of LLMs, and an active area of research studies its effects. While evaluation data contamination is easily understood intuitively, it is surprisingly difficult to define precisely which samples should be considered contaminated and, consequently, how it impacts benchmark scores. We propose that these questions should be addressed together and that contamination metrics can be assessed based on whether models benefit from the examples they mark contaminated. We propose a novel analysis method called ConTAM, and show with a large scale survey of existing and novel n-gram based contamination metrics across 13 benchmarks and 7 models from 2 different families that ConTAM can be used to better understand evaluation data contamination and its effects. We find that contamination may have a much larger effect than reported in recent LLM releases and benefits models differently at different scales. We also find that considering only the longest contaminated substring provides a better signal than considering a union of all contaminated substrings, and that doing model and benchmark specific threshold analysis greatly increases the specificity of the results. Lastly, we investigate the impact of hyperparameter choices, finding that, among other things, both using larger values of n and disregarding matches that are infrequent in the pre-training data lead to many false negatives. With ConTAM, we provide a method to empirically ground evaluation data contamination metrics in downstream effects. With our exploration, we shed light on how evaluation data contamination can impact LLMs and provide insight into the considerations important when doing contamination analysis. We end our paper by discussing these in more detail and providing concrete suggestions for future work.

This paper proposes a method for the automatic creation of variables (in the case of regression) that complement the information contained in the initial input vector. The method works as a pre-processing step in which the continuous values of the variable to be regressed are discretized into a set of intervals which are then used to define value thresholds. Then classifiers are trained to predict whether the value to be regressed is less than or equal to each of these thresholds. The different outputs of the classifiers are then concatenated in the form of an additional vector of variables that enriches the initial vector of the regression problem. The implemented system can thus be considered as a generic pre-processing tool. We tested the proposed enrichment method with 5 types of regressors and evaluated it in 33 regression datasets. Our experimental results confirm the interest of the approach.

We consider the problem of automatic generation of control strategies for robotic vehicles given a set of high-level mission specifications, such as "Vehicle x must eventually visit a target region and then return to a base," "Regions A and B must be periodically surveyed," or "None of the vehicles can enter an unsafe region." We focus on instances when all of the given specifications cannot be reached simultaneously due to their incompatibility and/or environmental constraints. We aim to find the least-violating control strategy while considering different priorities of satisfying different parts of the mission. Formally, we consider the missions given in the form of linear temporal logic formulas, each of which is assigned a reward that is earned when the formula is satisfied. Leveraging ideas from the automata-based model checking, we propose an algorithm for finding an optimal control strategy that maximizes the sum of rewards earned if this control strategy is applied. We demonstrate the proposed algorithm on an illustrative case study.

LLM agents increasingly act by writing code, yet a split persists between the runtime that drives the agent and the code the model writes. The runtime owns the loop, context, and control flow, and the model has little say over any of them. Letting model-written code shape the runtime itself would make agents more expressive, but it would also sharpen safety problems. A model can be diverted by a prompt injection, call the wrong tool, or fail partway and leave an inconsistent state, and each such failure reaches further when the code shapes the runtime than when it expresses a single action. We present LACUNA, a programming model for agents that closes this split while preserving safety. Each agent action is a typed call agent[T](task) that the LLM fills with code when execution reaches it, and the code is type-checked against the surrounding program before it runs. Because each action is accepted or rejected as a whole, a rejected one leaves the environment untouched, and its compiler diagnostics drive a retry. The same check also bounds which tools and data an action may use and how they flow. Our primitive expresses ReAct loops, sub-agents, skills, parallel decomposition, and multi-model planning as ordinary control flow. We evaluate LACUNA on a collection of test cases, BrowseComp-Plus, and τ^2-bench. On BrowseComp-Plus, 8.6% of generations are rejected before execution, with 0.7 retries per query on average, and the agent reaches 27.1% accuracy. On τ^2-bench, LACUNA solves 76.0% of 392 tasks across four domains with a capable model, on par with the baseline agent.

In regression and causal inference, controlled subgroup selection aims to identify, with inferential guarantees, a subgroup (defined as a subset of the covariate space) on which the average response or treatment effect is above a given threshold. E.g., in a clinical trial, it may be of interest to find a subgroup with a positive average treatment effect. However, existing methods either lack inferential guarantees, heavily restrict the search for the subgroup, or sacrifice efficiency by naive data splitting. We propose a novel framework called chiseling that allows the analyst to interactively refine and test a candidate subgroup by iteratively shrinking it. The sole restriction is that the shrinkage direction only depends on the points outside the current subgroup, but otherwise the analyst may leverage any prior information or machine learning algorithm. Despite this flexibility, chiseling controls the probability that the discovered subgroup is null (e.g., has a non-positive average treatment effect) under minimal assumptions: for example, in randomized experiments, this inferential validity guarantee holds under only bounded moment conditions. When applied to a variety of simulated datasets and a real survey experiment, chiseling identifies substantially better subgroups than existing methods with inferential guarantees.

Recovering governing Ordinary Differential Equations (ODEs) from data is a central challenge in modeling dynamical systems across scientific domains. Existing approaches cast discovery as a static inference problem over fixed datasets, assuming that the observed trajectories are sufficiently informative. However, dynamical systems evolve over large state spaces, and limited data can make multiple equations observationally indistinguishable, leading to identifiability gaps and the recovery of incorrect governing equations. To address this, we introduce LLM-ACES, or LLM-guided Active Closed-loop Equation Search, a closed-loop framework that jointly optimizes symbolic hypothesis construction and adaptive data acquisition. In LLM-ACES, a large language model (LLM) proposes operator priors that partition the large search space into distinct regions, within which candidate equations are fit to the observed data. The disagreement among these candidates guides the acquisition of informative trajectories, creating a feedback loop that iteratively refines both the hypothesis space and the discovered dynamics. On 122 ODE systems spanning ODEBench and ODEBase, LLM-ACES achieves the lowest median NMSE, outperforming state-of-the-art baselines by several orders of magnitude while achieving a high symbolic accuracy of 46.2% and 52.4%, respectively. Our analysis further shows that LLM-ACES is sample-efficient, achieving better performance with one-tenth the data. Furthermore, LLM-ACES's feedback-driven data acquisition makes it robust to noise and recovers the correct symbolic structure, while baselines introduce spurious terms that fit the data locally but obscure the true governing relationships.

Extracting causal relationships from observed correlations is a growing area in probabilistic reasoning, originating with the seminal work of Pearl and others from the early 1990s. This paper develops a new, categorically oriented view based on a clear distinction between syntax (string diagrams) and semantics (stochastic matrices), connected via interpretations as structure-preserving functors. A key notion in the identification of causal effects is that of an intervention, whereby a variable is forcefully set to a particular value independent of any prior propensities. We represent the effect of such an intervention as an endofunctor which performs `string diagram surgery' within the syntactic category of string diagrams. This diagram surgery in turn yields a new, interventional distribution via the interpretation functor. While in general there is no way to compute interventional distributions purely from observed data, we show that this is possible in certain special cases using a calculational tool called comb disintegration. We demonstrate the use of this technique on a well-known toy example, where we predict the causal effect of smoking on cancer in the presence of a confounding common cause. After developing this specific example, we show this technique provides simple sufficient conditions for computing interventions which apply to a wide variety of situations considered in the causal inference literature.

Independence testing is a fundamental and classical statistical problem that has been extensively studied in the batch setting when one fixes the sample size before collecting data. However, practitioners often prefer procedures that adapt to the complexity of a problem at hand instead of setting sample size in advance. Ideally, such procedures should (a) allow stopping earlier on easy tasks (and later on harder tasks), hence making better use of available resources, and (b) continuously monitor the data and efficiently incorporate statistical evidence after collecting new data, while controlling the false alarm rate. It is well known that classical batch tests are not tailored for streaming data settings: valid inference after data peeking requires correcting for multiple testing but such corrections generally result in low power. Following the principle of testing by betting, we design sequential kernelized independence tests (SKITs) that overcome such shortcomings. We exemplify our broad framework using bets inspired by kernelized dependence measures, e.g, the Hilbert-Schmidt independence criterion. Our test is valid under non-i.i.d. time-varying settings, for which there exist no batch tests. We demonstrate the power of our approaches on both simulated and real data.

This study presents a collection of physical devices and software services that fully automate Raman spectra measurements for liquid samples within a robotic facility. This method is applicable to various fields, with demonstrated efficacy in biotechnology, where Raman spectroscopy monitors substrates, metabolites, and product-related concentrations. Our system specifically measures 50 micro L samples using a liquid handling robot capable of taking 8 samples simultaneously. We record multiple Raman spectra for 10s each. Furthermore, our system takes around 20s for sample handling, cleaning, and preparation of the next measurement. All spectra and metadata are stored in a database, and we use a machine learning model to estimate concentrations from the spectra. This automated approach enables gathering spectra for various applications under uniform conditions in high-throughput fermentation processes, calibration procedures, and offline evaluations. This allows data to be combined to train sophisticated machine learning models with improved generalization. Consequently, we can develop accurate models more quickly for new applications by reusing data from prior applications, thereby reducing the need for extensive calibration data.

Looped computation shows promise in improving the reasoning-oriented performance of LLMs by scaling test-time compute. However, existing approaches typically require either training recurrent models from scratch or applying disruptive retrofits, which involve substantial computational costs and may compromise pretrained capabilities. To address these limitations, we introduce Looped Depth Up-Scaling (LoopUS), a post-training framework that converts a standard pretrained LLM into a looped architecture. As a key technical contribution, LoopUS recasts the pretrained LLM into an encoder, a looped reasoning block, and a decoder. It operationalizes this latent-refinement architecture through four core components: (1) block decomposition, guided by staged representation dynamics; (2) an input-dependent selective gate to mitigate hidden-state drift; (3) random deep supervision for memory-efficient learning over long recursive horizons; and (4) a confidence head for adaptive early exiting. Collectively, these mechanisms transform a standard non-looped model into a looped form while stabilizing it against both computational bottlenecks and representation collapse. Through stable latent looping, LoopUS improves reasoning-oriented performance without extending the generated traces or requiring recurrent training from scratch. For more details, see https://thrillcrazyer.github.io/LoopUS

This paper introduces SCOPE-RL, a comprehensive open-source Python software designed for offline reinforcement learning (offline RL), off-policy evaluation (OPE), and selection (OPS). Unlike most existing libraries that focus solely on either policy learning or evaluation, SCOPE-RL seamlessly integrates these two key aspects, facilitating flexible and complete implementations of both offline RL and OPE processes. SCOPE-RL put particular emphasis on its OPE modules, offering a range of OPE estimators and robust evaluation-of-OPE protocols. This approach enables more in-depth and reliable OPE compared to other packages. For instance, SCOPE-RL enhances OPE by estimating the entire reward distribution under a policy rather than its mere point-wise expected value. Additionally, SCOPE-RL provides a more thorough evaluation-of-OPE by presenting the risk-return tradeoff in OPE results, extending beyond mere accuracy evaluations in existing OPE literature. SCOPE-RL is designed with user accessibility in mind. Its user-friendly APIs, comprehensive documentation, and a variety of easy-to-follow examples assist researchers and practitioners in efficiently implementing and experimenting with various offline RL methods and OPE estimators, tailored to their specific problem contexts. The documentation of SCOPE-RL is available at https://scope-rl.readthedocs.io/en/latest/.

Large language models are increasingly used as chemistry assistants, yet most chemistry benchmarks still score only final answers. This masks a critical failure mode: a model may output the correct molecule, product, or option while its reasoning violates chemical logic. Existing process-level evaluators are hard to scale because LLM judges and human step-level process annotation are costly, inconsistent, and vulnerable to hallucination. We introduce ChemCoTBench-V2, a rule-verifiable diagnostic benchmark for low-cost, auditable evaluation of structured, verifier-addressable chemical reasoning traces. It spans molecular understanding, molecule editing, molecular optimization, and reaction prediction, with 5,620 evaluation samples across 18 reporting tasks. Models must expose key intermediate steps in expert-designed templates, and those steps are checked with deterministic chemistry rules and, for closed-answer tasks, reference traces rather than another LLM judge. Open-ended molecular optimization is evaluated with oracle-verifiable state constraints rather than strict trace matching. The benchmark reports three separate signals: final-answer correctness, template adherence, and step-wise verifier correctness over expert-refined intermediate commitments. Experiments on frontier models reveal a persistent gap between final-answer success and structured-reasoning-state consistency: models often follow the requested format while failing chemical-step checks, or answer correctly with weak supporting reasoning. ChemCoTBench-V2 enables fine-grained model comparison and identifies the concrete step at which the trace first violates the verifier.

We study infinite-horizon average-reward Markov decision processes (AMDPs) in the context of general function approximation. Specifically, we propose a novel algorithmic framework named Local-fitted Optimization with OPtimism (LOOP), which incorporates both model-based and value-based incarnations. In particular, LOOP features a novel construction of confidence sets and a low-switching policy updating scheme, which are tailored to the average-reward and function approximation setting. Moreover, for AMDPs, we propose a novel complexity measure -- average-reward generalized eluder coefficient (AGEC) -- which captures the challenge of exploration in AMDPs with general function approximation. Such a complexity measure encompasses almost all previously known tractable AMDP models, such as linear AMDPs and linear mixture AMDPs, and also includes newly identified cases such as kernel AMDPs and AMDPs with Bellman eluder dimensions. Using AGEC, we prove that LOOP achieves a sublinear mathcal{O}(poly(d, sp(V^*)) Tbeta ) regret, where d and beta correspond to AGEC and log-covering number of the hypothesis class respectively, sp(V^*) is the span of the optimal state bias function, T denotes the number of steps, and mathcal{O} (cdot) omits logarithmic factors. When specialized to concrete AMDP models, our regret bounds are comparable to those established by the existing algorithms designed specifically for these special cases. To the best of our knowledge, this paper presents the first comprehensive theoretical framework capable of handling nearly all AMDPs.

Inference-time skill augmentation provides a lightweight way to improve data-analytic agents by injecting reusable procedural knowledge without updating model parameters. However, discovering effective skills for data analysis remains challenging, as reliable supervision is expensive and success criteria vary across analytical formats. This raises the key question of how to discover reusable data-analysis skills from unlabeled exploration alone. We propose DataCOPE, an unsupervised verifier-guided skill discovery framework for data-analytic agents. DataCOPE derives verifier signals from the exploration trajectories and uses them to characterize relative quality or aggreement among trajectories. It iteratively coordinates a Data-Analytic Agent for trajectory generation, an Unsupervised Verifier for signal extraction, and a Skill Manager for contrastive skill distillation. For report-style analysis, we instantiate the verifier as an Adaptive Checklist Verifier that derives task-specific criteria, scores reports by verifiable coverage, and iteratively refines the checklist. For reasoning-style analysis, we instantiate it as an Answer Agreement Verifier that groups trajectories by answer agreement and uses self-consistency as an auxiliary signal. We evaluate DataCOPE on report-style analysis from Deep Data Research and reasoning-style analysis from DABStep. Across both settings, DataCOPE consistently improves held-out performance over baselines. Averaged across four model settings, DataCOPE improves the mean score by 9.71% and 32.30% on report-style and reasoning-style tasks respectively.

Scientific research is being reshaped by AI systems that move beyond isolated assistance toward longer-horizon workflows spanning literature grounding, hypothesis generation, experimentation, validation, reporting, and revision. This shift marks a transition from task-level AI for science to workflow-level research automation. Yet current systems remain fragmented, differing in autonomy, domain scope, execution environment, validation mechanism, and human oversight, while still struggling with evidence preservation, reproducibility, weak-direction rejection, provenance tracking, cross-domain robustness, and accountable scientific closure. This survey examines these developments through AutoResearch, defined as the developmental spectrum of AI-powered scientific workflow automation. Within it, Vibe Research denotes the human-steered region of prompt-based assistance and human-verified execution, whereas emerging AI-led systems coordinate larger portions of the discovery loop without achieving robust autonomy. We analyze how research systems redistribute control, evidence, execution, validation, and accountability across workflows and organize the field around five workflow conditions: literature and research grounding; hypothesis formation and planning; experimentation and tool use; feedback, validation, and review; and reporting and knowledge communication. We further synthesize AI scientist systems, mixed-initiative co-research frameworks, benchmarks, domain deployments, and open-source infrastructures. Finally, we propose five evaluation dimensions--novelty, validity, impact, reliability, and provenance--and show that AutoResearch autonomy is domain-conditioned, being more credible in structured, executable, and rapidly verifiable settings but limited in embodied, delayed, heterogeneous, ethical, or institutionally accountable contexts.

Environment setup-the process of configuring the system to work with a specific software project-represents a persistent challenge in Software Engineering (SE). Automated environment setup methods could assist developers by providing fully configured environments for arbitrary repositories without manual effort. This also helps SE researchers to scale execution-based benchmarks. However, recent studies reveal that even state-of-the-art Large Language Models (LLMs) achieve limited success in automating this task. To address this limitation, we tune a specialized model for environment setup. We combine supervised fine-tuning for generating correct Bash scripts and Reinforcement Learning with Verifiable Rewards (RLVR) to adapt it to the task of environment setup. On EnvBench-Python, our method enables Qwen3-8B (a model runnable on consumer hardware) to perform on par with larger models-Qwen3-32B and GPT-4o. The training code and model checkpoints are available online: https://github.com/JetBrains-Research/PIPer.

Test-time reasoning is increasingly used as a serving-time control knob, but extra reasoning is not uniformly valuable: it can repair failed attempts, waste compute on already-correct answers, or introduce harmful answer changes. We study this as a deployment allocation problem rather than a new-verifier problem. We introduce \sevra, Selective Verification for Reasoning Allocation, a serving-layer controller that decides whether to preserve a frozen solver's initial answer or invoke active verification. Using a frozen Qwen3-4B solver, we log intervention outcomes and train recoverability-aware gates from serving-visible attempt state. On \mathfive, selective verification reaches 76.3\% accuracy, compared with 75.5\% for always verifying, while reducing post-generation tokens by 26.8\% and harmful flips from 2.2\% to 1.0\%. However, an 8,192-token initial solve reaches 76.0\% accuracy with 28\% fewer total model tokens, showing that selective recovery is useful but not the best tested cost frontier. In frozen transfer to \gsm, the selective policy verifies only 3.0\% of examples, improves accuracy from 93.4\% to 94.5\%, and reduces verification tokens by 91.2\% relative to always verifying; again, a longer initial solve matches its accuracy with fewer realized tokens. On CommonsenseQA, always-on verification hurts, while Self-Consistency@5 improves accuracy at about five times the realized token cost. The resulting deployment rule is: tune the initial budget first, then use selective recovery when explicit checks, bounded retries, auditability, or regression-risk control matter.

The objective of this paper is to understand what characteristics and features of clinical data influence physician's decision about ordering laboratory tests or prescribing medications the most. We conduct our analysis on data and decisions extracted from electronic health records of 4486 post-surgical cardiac patients. The summary statistics for 335 different lab order decisions and 407 medication decisions are reported. We show that in many cases, physician's lab-order and medication decisions can be well predicted from a small subset of all features.

Steering the behavior of Large Language Models (LLMs) remains a challenge, particularly in engineering applications where precision and reliability are critical. While fine-tuning and prompting methods can modify model behavior, they lack the dynamic and exact control necessary for engineering applications. Inference-time intervention techniques provide a promising alternative, allowing targeted adjustments to LLM outputs. In this work, we demonstrate how interventions enable fine-grained control for automating the usually time-intensive requirement verification process in Model-Based Systems Engineering (MBSE). Using two early-stage Capella SysML models of space missions with associated requirements, we apply the intervened LLMs to reason over a graph representation of the model to determine whether a requirement is fulfilled. Our method achieves robust and reliable outputs, significantly improving over both a baseline model and a fine-tuning approach. By identifying and modifying as few as one to three specialised attention heads, we can significantly change the model's behavior. When combined with self-consistency, this allows us to achieve perfect precision on our holdout test set.

Formal verification can provably guarantee the correctness of critical system software, but the high proof burden has long hindered its wide adoption. Recently, Large Language Models (LLMs) have shown success in code analysis and synthesis. In this paper, we present a combination of LLMs and static analysis to synthesize invariants, assertions, and other proof structures for a Rust-based formal verification framework called Verus. In a few-shot setting, LLMs demonstrate impressive logical ability in generating postconditions and loop invariants, especially when analyzing short code snippets. However, LLMs lack the ability to retain and propagate context information, a strength of traditional static analysis. Based on these observations, we developed a prototype based on OpenAI's GPT-4 model. Our prototype decomposes the verification task into multiple smaller ones, iteratively queries GPT-4, and combines its output with lightweight static analysis. We evaluated the prototype with a developer in the automation loop on 20 vector-manipulating programs. The results demonstrate that it significantly reduces human effort in writing entry-level proof code.

Understanding causality should be a core requirement of any attempt to build real impact through AI. Due to the inherent unobservability of counterfactuals, large randomised trials (RCTs) are the standard for causal inference. But large experiments are generically expensive, and randomisation carries its own costs, e.g. when suboptimal decisions are trialed. Recent work has proposed more sample-efficient alternatives to RCTs, but these are not adaptable to the downstream application for which the causal effect is sought. In this work, we develop a task-specific approach to experimental design and derive sampling strategies customised to particular downstream applications. Across a range of important tasks, real-world datasets, and sample sizes, our method outperforms other benchmarks, e.g. requiring an order-of-magnitude less data to match RCT performance on targeted marketing tasks.

To enhance the controllability of text-to-image diffusion models, current ControlNet-like models have explored various control signals to dictate image attributes. However, existing methods either handle conditions inefficiently or use a fixed number of conditions, which does not fully address the complexity of multiple conditions and their potential conflicts. This underscores the need for innovative approaches to manage multiple conditions effectively for more reliable and detailed image synthesis. To address this issue, we propose a novel framework, DynamicControl, which supports dynamic combinations of diverse control signals, allowing adaptive selection of different numbers and types of conditions. Our approach begins with a double-cycle controller that generates an initial real score sorting for all input conditions by leveraging pre-trained conditional generation models and discriminative models. This controller evaluates the similarity between extracted conditions and input conditions, as well as the pixel-level similarity with the source image. Then, we integrate a Multimodal Large Language Model (MLLM) to build an efficient condition evaluator. This evaluator optimizes the ordering of conditions based on the double-cycle controller's score ranking. Our method jointly optimizes MLLMs and diffusion models, utilizing MLLMs' reasoning capabilities to facilitate multi-condition text-to-image (T2I) tasks. The final sorted conditions are fed into a parallel multi-control adapter, which learns feature maps from dynamic visual conditions and integrates them to modulate ControlNet, thereby enhancing control over generated images. Through both quantitative and qualitative comparisons, DynamicControl demonstrates its superiority over existing methods in terms of controllability, generation quality and composability under various conditional controls.

Closed-loop brain stimulation refers to capturing neurophysiological measures such as electroencephalography (EEG), quickly identifying neural events of interest, and producing auditory, magnetic or electrical stimulation so as to interact with brain processes precisely. It is a promising new method for fundamental neuroscience and perhaps for clinical applications such as restoring degraded memory function; however, existing tools are expensive, cumbersome, and offer limited experimental flexibility. In this article, we propose the Portiloop, a deep learning-based, portable and low-cost closed-loop stimulation system able to target specific brain oscillations. We first document open-hardware implementations that can be constructed from commercially available components. We also provide a fast, lightweight neural network model and an exploration algorithm that automatically optimizes the model hyperparameters to the desired brain oscillation. Finally, we validate the technology on a challenging test case of real-time sleep spindle detection, with results comparable to off-line expert performance on the Massive Online Data Annotation spindle dataset (MODA; group consensus). Software and plans are available to the community as an open science initiative to encourage further development and advance closed-loop neuroscience research.

Intermittent Androgen Suppression (IAS) is a treatment strategy for delaying or even preventing time to relapse of advanced prostate cancer. IAS consists of alternating cycles of therapy (in the form of androgen suppression) and off-treatment periods. The level of prostate specific antigen (PSA) in a patient's serum is frequently monitored to determine when the patient will be taken off therapy and when therapy will resume. In spite of extensive recent clinical experience with IAS, the design of an ideal protocol for any given patient remains one of the main challenges associated with effectively implementing this therapy. We use a threshold-based policy for optimal IAS therapy design that is parameterized by lower and upper PSA threshold values and is associated with a cost metric that combines clinically relevant measures of therapy success. We apply Infinitesimal Perturbation Analysis (IPA) to a Stochastic Hybrid Automaton (SHA) model of prostate cancer evolution under IAS and derive unbiased estimators of the cost metric gradient with respect to various model and therapy parameters. These estimators are subsequently used for system analysis. By evaluating sensitivity estimates with respect to several model parameters, we identify critical parameters and demonstrate that relaxing the optimality condition in favor of increased robustness to modeling errors provides an alternative objective to therapy design for at least some patients.

Training modern neural networks is increasingly fragile, with rare but severe destabilizing updates often causing irreversible divergence or silent performance degradation. Existing optimization methods primarily rely on preventive mechanisms embedded within the optimizer, offering limited ability to detect and recover from instability once it occurs. We introduce a supervisory runtime stability framework that treats optimization as a controlled stochastic process. By isolating an innovation signal derived from secondary measurements, such as validation probes, the framework enables automatic detection and recovery from destabilizing updates without modifying the underlying optimizer. We provide theoretical runtime safety guarantees that formalize bounded degradation and recovery. Our implementation incurs minimal overhead and is compatible with memory-constrained training settings.

In many Reinforcement Learning (RL) papers, learning curves are useful indicators to measure the effectiveness of RL algorithms. However, the complete raw data of the learning curves are rarely available. As a result, it is usually necessary to reproduce the experiments from scratch, which can be time-consuming and error-prone. We present Open RL Benchmark, a set of fully tracked RL experiments, including not only the usual data such as episodic return, but also all algorithm-specific and system metrics. Open RL Benchmark is community-driven: anyone can download, use, and contribute to the data. At the time of writing, more than 25,000 runs have been tracked, for a cumulative duration of more than 8 years. Open RL Benchmark covers a wide range of RL libraries and reference implementations. Special care is taken to ensure that each experiment is precisely reproducible by providing not only the full parameters, but also the versions of the dependencies used to generate it. In addition, Open RL Benchmark comes with a command-line interface (CLI) for easy fetching and generating figures to present the results. In this document, we include two case studies to demonstrate the usefulness of Open RL Benchmark in practice. To the best of our knowledge, Open RL Benchmark is the first RL benchmark of its kind, and the authors hope that it will improve and facilitate the work of researchers in the field.

Background. The rapid and growing popularity of machine learning (ML) applications has led to an increasing interest in MLOps, that is, the practice of continuous integration and deployment (CI/CD) of ML-enabled systems. Aims. Since changes may affect not only the code but also the ML model parameters and the data themselves, the automation of traditional CI/CD needs to be extended to manage model retraining in production. Method. In this paper, we present an initial investigation of the MLOps practices implemented in a set of ML-enabled systems retrieved from GitHub, focusing on GitHub Actions and CML, two solutions to automate the development workflow. Results. Our preliminary results suggest that the adoption of MLOps workflows in open-source GitHub projects is currently rather limited. Conclusions. Issues are also identified, which can guide future research work.

LLMs are increasingly used as general-purpose reasoners, but long inputs remain bottlenecked by a fixed context window. Recursive Language Models (RLMs) address this by externalising the prompt and recursively solving subproblems. Yet existing RLMs depend on an open-ended read-eval-print loop (REPL) in which the model generates arbitrary control code, making execution difficult to verify, predict, and analyse. We introduce λ-RLM, a framework for long-context reasoning that replaces free-form recursive code generation with a typed functional runtime grounded in λ-calculus. It executes a compact library of pre-verified combinators and uses neural inference only on bounded leaf subproblems, turning recursive reasoning into a structured functional program with explicit control flow. We show that λ-RLM admits formal guarantees absent from standard RLMs, including termination, closed-form cost bounds, controlled accuracy scaling with recursion depth, and an optimal partition rule under a simple cost model. Empirically, across four long-context reasoning tasks and nine base models, λ-RLM outperforms standard RLM in 29 of 36 model-task comparisons, improves average accuracy by up to +21.9 points across model tiers, and reduces latency by up to 4.1x. These results show that typed symbolic control yields a more reliable and efficient foundation for long-context reasoning than open-ended recursive code generation. The complete implementation of λ-RLM, is open-sourced for the community at: https://github.com/lambda-calculus-LLM/lambda-RLM.

Throughout the different phases of a drug development program, randomized trials are used to establish the tolerability, safety, and efficacy of a candidate drug. At each stage one aims to optimize the design of future studies by extrapolation from the available evidence at the time. This includes collected trial data and relevant external data. However, relevant external data are typically available as averages only, for example from trials on alternative treatments reported in the literature. Here we report on such an example from a drug development for wet age-related macular degeneration. This disease is the leading cause of severe vision loss in the elderly. While current treatment options are efficacious, they are also a substantial burden for the patient. Hence, new treatments are under development which need to be compared against existing treatments. The general statistical problem this leads to is meta-analysis, which addresses the question of how we can combine datasets collected under different conditions. Bayesian methods have long been used to achieve partial pooling. Here we consider the challenge when the model of interest is complex (hierarchical and nonlinear) and one dataset is given as raw data while the second dataset is given as averages only. In such a situation, common meta-analytic methods can only be applied when the model is sufficiently simple for analytic approaches. When the model is too complex, for example nonlinear, an analytic approach is not possible. We provide a Bayesian solution by using simulation to approximately reconstruct the likelihood of the external summary and allowing the parameters in the model to vary under the different conditions. We first evaluate our approach using fake-data simulations and then report results for the drug development program that motivated this research.

Foundation models have transformed automated code generation, yet autonomous software-engineering agents remain unreliable in realistic development settings. The dominant explanation locates this gap in model capability. We propose a different locus: software-engineering capability emerges from a model-harness-environment system, in which a runtime substrate -- the harness -- mediates how a foundation-model agent observes a project, acts on it, receives feedback, and establishes that a change is complete. We formalize this substrate as an AI Harness Engineering and identify eleven component responsibilities: task specification, context selection, tool access, project memory, task state, observability, failure attribution, verification, permissions, entropy auditing, and intervention recording. We operationalize the harness through a four-level ladder (H0-H3) that progressively exposes runtime support to the agent, and we propose a trace-based evaluation protocol that converts each agent run into an auditable episode package. Applied to a controlled validation task, the framework yields episode packages whose evidence structure varies systematically with harness level: lower levels produce only a final patch, higher levels produce reproduction logs, failure attributions, deterministic requirement checks, and structured verification reports. The framework reframes the central question of autonomous software engineering from whether a foundation model can produce a patch to whether the model-harness-environment system can produce a verifiably correct, attributed, and maintainable change. We outline a research program for the runtime systems that foundation-model software agents will require.

AI-assisted software generation has increased development speed, but it has also amplified a persistent engineering problem: systems that are functionally correct may still be structurally insecure. In practice, prompt-based security review with large language models often suffers from uneven coverage, weak reproducibility, unsupported findings, and the absence of an immutable audit trail. The ESAA architecture addresses a related governance problem in agentic software engineering by separating heuristic agent cognition from deterministic state mutation through append-only events, constrained outputs, and replay-based verification. This paper presents ESAA-Security, a domain-specific specialization of ESAA for agent-assisted security auditing of software repositories, with particular emphasis on AI-generated or AI-modified code. ESAA-Security structures auditing as a governed execution pipeline with four phases reconnaissance, domain audit execution, risk classification, and final reporting and operationalizes the workflow into 26 tasks, 16 security domains, and 95 executable checks. The framework produces structured check results, vulnerability inventories, severity classifications, risk matrices, remediation guidance, executive summaries, and a final markdown/JSON audit report. The central idea is that security review should not be modeled as a free-form conversation with an LLM, but as an evidence-oriented audit process governed by contracts and events. In ESAA-Security, agents emit structured intentions under constrained protocols; the orchestrator validates them, persists accepted outputs to an append-only log, reprojects derived views, and verifies consistency through replay and hashing. The result is a traceable, reproducible, and risk-oriented audit architecture whose final report is auditable by construction.

We present MixtureVitae, an open-access pretraining corpus built to minimize legal risk while providing strong model performance. MixtureVitae follows a risk-mitigated sourcing strategy that combines public-domain and permissively licensed text (e.g., CC-BY/Apache) with carefully justified low-risk additions (e.g., government works and EU TDM-eligible sources), alongside targeted instruction, reasoning and synthetic data with documented provenance. We detail a transparent, multi-stage pipeline for license-aware filtering, safety and quality screening, and domain-aware mixing, and we release the dataset and curation recipes to support reproducible research. In controlled experiments using the open-sci-ref training protocol (fixed architectures at 130M/400M/1.3B/1.7B parameters; training budgets of 50B and 300B tokens), models trained on MixtureVitae consistently outperform other permissive datasets across a suite of standard benchmarks, and at the 1.7B/300B setting they surpass FineWeb-Edu and approach DCLM in the later stages of training. Performance is particularly strong on math/code and competitive on QA tasks. These results demonstrate that permissive-first, risk-mitigated data provides a practical and legally mitigated foundation for training capable LLMs, reducing reliance on indiscriminate web scraping without sacrificing competitiveness. Code: https://github.com/ontocord/mixturevitae

As AI systems become more capable, we would like to enlist their help to supervise other AIs. We experiment with methods for training a harmless AI assistant through self-improvement, without any human labels identifying harmful outputs. The only human oversight is provided through a list of rules or principles, and so we refer to the method as 'Constitutional AI'. The process involves both a supervised learning and a reinforcement learning phase. In the supervised phase we sample from an initial model, then generate self-critiques and revisions, and then finetune the original model on revised responses. In the RL phase, we sample from the finetuned model, use a model to evaluate which of the two samples is better, and then train a preference model from this dataset of AI preferences. We then train with RL using the preference model as the reward signal, i.e. we use 'RL from AI Feedback' (RLAIF). As a result we are able to train a harmless but non-evasive AI assistant that engages with harmful queries by explaining its objections to them. Both the SL and RL methods can leverage chain-of-thought style reasoning to improve the human-judged performance and transparency of AI decision making. These methods make it possible to control AI behavior more precisely and with far fewer human labels.

Applied Behavior Analysis (ABA) is a clinical discipline whose documentation, teaching programs and multi-session behavioral logs, is formulaic and high-volume, yet real session data is HIPAA-protected and bound by professional confidentiality rules, blocking the release of a training corpus. We present TRACE (Taxonomy-Referenced ABA Clinical Examples), a 2,999-example synthetic instruction-tuning dataset covering two ABA tasks: teaching-program generation across Discrete Trial Training, Natural Environment Teaching, and Task Analysis; and multi-session behavioral interpretation across twelve trajectory patterns and thirteen target behaviors. Every example is produced by a deterministic taxonomy-driven generator grounded in the canonical ABA literature, and every example carries complete sampling provenance, the exact taxonomy cells that produced it. The dataset is released under CC BY-NC 4.0 for data and MIT for code, with stratified train (2,549), validation (149), test (281), and sanity (20) splits. TRACE is a research artifact and has not been clinically validated.

AI for scientific discovery is entering an agentic era, where protein-engineering systems are expected to prioritize future wet-lab experiments rather than merely fit static measurements. We introduce TadA-Bench, a million-variant wet-lab replay benchmark from 31 TadA directed-evolution rounds for future-round discovery toward agentic protein engineering. TadA-Bench preserves the campaign chronology and defines a fixed-data replay task: given earlier experimental rounds, models rank variants that appear only in later rounds. It provides aligned DNA, RNA, and protein views, and uses Seq2Graph, a graph-based label-unification pipeline, to reconcile noisy enrichment measurements into consistent cross-round activity labels. Random-split controls show strong interpolation, but future-round ranking and finite-budget candidate selection are much weaker. Controlled analyses suggest that evolutionary coverage is more informative than local data density, positioning TadA-Bench as a reproducible wet-lab replay substrate for future-round discovery toward agentic protein engineering; the data and code are released on Hugging Face and GitHub.

The dominant industry response to AI-generated code quality problems is to deploy AI reviewers. This paper argues that this response is structurally circular when executable specifications are absent: without an external reference, both the generating agent and the reviewing agent reason from the same artefact, share the same training distribution, and exhibit correlated failures. The review checks code against itself, not against intent. Three hypotheses are developed. First, that correlated errors in homogeneous LLM pipelines echo rather than cancel, a claim supported by convergent empirical evidence from multiple 2025-2026 studies and by three small contrived experiments reported here. The first two experiments are same-family (Claude reviewing Claude-generated code); the third extends to a cross-family panel of four models from three families. All use a planted bug corpus rather than a natural defect sample; they are directional evidence, not a controlled demonstration. Second, that executable specifications perform a domain transition in the Cynefin sense, converting enabling constraints into governing constraints and moving the problem from the complex domain to the complicated domain, a transition that AI makes economically viable at scale. Third, that the defect classes lying outside the reach of executable specifications form a well-defined residual, which is the legitimate and bounded target for AI review. The combined argument implies an architecture: specifications first, deterministic verification pipeline second, AI review only for the structural and architectural residual. This is not a claim that AI review is valueless. It is a claim about what it is actually for, and about what happens when it is deployed without the foundation that makes it non-circular.

This paper proposes an approach to analyze an event log of a business process in order to generate case-level recommendations of treatments that maximize the probability of a given outcome. Users classify the attributes in the event log into controllable and non-controllable, where the former correspond to attributes that can be altered during an execution of the process (the possible treatments). We use an action rule mining technique to identify treatments that co-occur with the outcome under some conditions. Since action rules are generated based on correlation rather than causation, we then use a causal machine learning technique, specifically uplift trees, to discover subgroups of cases for which a treatment has a high causal effect on the outcome after adjusting for confounding variables. We test the relevance of this approach using an event log of a loan application process and compare our findings with recommendations manually produced by process mining experts.

We use a Stochastic Hybrid Automaton (SHA) model of prostate cancer evolution under intermittent androgen suppression (IAS) to study a threshold-based policy for therapy design. IAS is currently one of the most widely used treatments for advanced prostate cancer. Patients undergoing IAS are submitted to cycles of treatment (in the form of androgen deprivation) and off-treatment periods in an alternating manner. One of the main challenges in IAS is to optimally design a therapy scheme, i.e., to determine when to discontinue and recommence androgen suppression. The level of prostate specific antigen (PSA) in a patient's serum is frequently monitored to determine when the patient will be taken off therapy and when therapy will resume. The threshold-based policy we propose is parameterized by lower and upper PSA threshold values and is associated with a cost metric that combines clinically relevant measures of therapy success. Using Infinitesimal Perturbation Analysis (IPA), we derive unbiased gradient estimators of this cost metric with respect to the controllable PSA threshold values based on actual data and show how these estimators can be used to adaptively adjust controllable parameters so as to improve therapy outcomes based on the cost metric defined.

Dynamic treatment regimes (DTRs) are personalized, adaptive, multi-stage treatment plans that adapt treatment decisions both to an individual's initial features and to intermediate outcomes and features at each subsequent stage, which are affected by decisions in prior stages. Examples include personalized first- and second-line treatments of chronic conditions like diabetes, cancer, and depression, which adapt to patient response to first-line treatment, disease progression, and individual characteristics. While existing literature mostly focuses on estimating the optimal DTR from offline data such as from sequentially randomized trials, we study the problem of developing the optimal DTR in an online manner, where the interaction with each individual affect both our cumulative reward and our data collection for future learning. We term this the DTR bandit problem. We propose a novel algorithm that, by carefully balancing exploration and exploitation, is guaranteed to achieve rate-optimal regret when the transition and reward models are linear. We demonstrate our algorithm and its benefits both in synthetic experiments and in a case study of adaptive treatment of major depressive disorder using real-world data.